How To Upgrade Weight Distribution System From 2" Shank to 2-1/2"
Question:
I have a 2020 Chevy 3500HD High Country. The factory receiver hitch is a 21/2 with a 2 adapter. With the 2 adapter installed there is a lot of play when the trailer shank and hitch is ed. Trailer has a 10000lb GVWR Would it be better to get a a 2/12 shank shank? I do have a clamp that is supposed to reduce the play but not sure which is the best way to go. Thank you.
asked by: Dennis J
Helpful Expert Reply:
It sounds like you're using a weight distribution system and in which case the best option and what many others do as well is ditch the 2 to 2-1/2" adapter in favor of a 2-1/2" shank which will be less parts and far more secure/durable. The good news is that no matter which system you have, you can use the Equal-i-zer Weight Dist Shank part # EQ90-02-4800.
I have attached a full list of 2-1/2" shank options below as well.
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Q&A: Replacement Reese Trunnion Spring Bars for Reese WD System and 1,500 lb Tongue Weight
- Q&A: Options For Longer Shank For Equal-i-zer Weight Distribution System
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 1,500 lbs TW
- Shop: Replacement Trunnion Spring Bar for Reese Weight Distribution System - 800 lbs TW
- Video: Equal-i-zer Weight Distribution Shank Review - 2013 Ford F-250
- Video: Powerbuilt 12 Point Socket with 3/4 Inch Drive Review
- Search Results: torque wrench
- Search Results: equalizer hitch head
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 14,000 lbs
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome
- Q&A: Will Equalizer 2-1/2 inch Weight Distribution Shank Replace Fastway 2 in Weight Distribution Shank
- Search Results: eq90~02~4800
- Q&A: Can a 2" Weight Distribution Shank Be Swapped Out for a 2-1/2" Shank
- Q&A: How to Measure to Find Weight Distribution Shank with the Right Amount of Drop to Tow Trailer Level
- Q&A: How To Choose Correct 2.5" Weight Distribution Shank
- Q&A: Tongue Weight Capacity of the Equalizer Shank
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
