Customers compare HR26 to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Brophy hitch reducer and extender, two and a half inch to two inch trailer hitch, part number HR26. With this product not only do you get a reducer, but you also get an extender. It's perfect for situations such as this where we can't drop our tailgate down all the way because our jack is getting in the way. Now with it installed as you can see, zero… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Curt High-Low Adapter #C59KR is designed for flat towing only. Curt doesn't even test it for accessories to give it a tongue weight rating. The Roadmaster #RM-048-4 is the most comparable with a distance of 9-5/8" from hitch pin…
view full answer...The Yakima StageTwo Bike Rack #Y47VR won't secure properly to the adapter you're talking about. It's a great rack and I love the anti-rattle system, but the anti-rattle is built to essentially brace itself inside the receiver…
view full answer...We do have what you need, but since your 2022 Winnebago 2529RG is prewired for the Voyager system you will not want to use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR that you were looking at. Because you will…
view full answer...The Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA57YR does not have currently have sidemarker-type cameras that are compatible with this specific system so you would need to purchase the Replacement Voyager WiSight 2.0 Wireless RV…
view full answer...The SuperSprings Custom Suspension Stabilizer and Sway Control Kit part #SSA22 is a confirmed fit for a 2019 Ford F-250 Super Duty. The springs work to pre-load the factory leaf springs so there will be less squat and saq while towing/hauling. They…
view full answer...The correct 2,200 lb capacity SuperSprings for your 2017 Ford F-250 4WD is the part #SSA22 that you referenced. These fit with or without the overload springs as well. It is a single leaf spring that matches the width of your leaf springs as well.
view full answer...The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 will fit your 2021 Ford F-250 Super Duty whether it has the factory overload springs or not. Some other suspension kits fit depends on the factory overload springs being…
view full answer...The SuperSprings #SSA22 would be a smart choice to raise your 2012 Ford F-250 when pulling your fifth wheel. They are designed to prevent the sagging you are experiencing and should put you pretty close to level. If you take a look at the attached…
view full answer...Though we do not carry the Hellwig product, from what I could find, the SuperSprings #SSA25 kit will install much the same way. As I wasn't 100% on that, I called over and spoke to one of the Techs at SuperSprings and they confirmed that it would…
view full answer...We have one solution that will work well, but you'll need to have a 2-1/2 inch hitch installed on your tow vehicle. The Brophy hitch extender part #HR26 is a 7 inch extension with a capacity of 10,000 lbs so it would work well.
view full answer...I do have a solution for you. My recommendation is to use the Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2" #C45405, in combination with the Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs…
view full answer...Brophy hitch extender and reducer #HR26 is indeed rated for use with weight distribution. When used with weight distribution this reducer is rated for 10,000 pounds gross trailer weight and 1,000 pounds tongue weight. However, the use of this…
view full answer...