Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop

See what our Experts say about this Equal-i-zer Accessories and Parts

• Shank With 12 Inches of Drop for 14,000 lb Equal-i-zer Weight Distribution System
  We do have a shank with 12 inches of drop that will work with the 14,000 lb towing/1,400 lb tongue weight capacity Equal-i-zer Weight Distribution with 4-Point Sway Control - No Shank # EQ37141ET. There are options for both a 2 inch and 2-1/2 inch hitch, so you can choose the right one based on your hitch size, and both shanks have the capacity needed to work with this Equal-i-zer system as well as the maximum 12 inch drop you need. - 2 Inch Hitch: Equalizer Weight Distribution Shank...
  view full answer...
• Are Equal-i-zer WDH Heads Interchangeable With Differnet Capacity Springs
  Equal-i-zer weight distribution hitches use different heads for each capacity so you would need to completely swap out the entire system in order to meet the GVWR of your trailer. If the system you have is all original then the head and spring bars would also be rated for 10,000lbs like the shank is. If you bought it used or swapped anything out then you would need to find the item number sticker on each part to determine what they are and their capacity. To determine the best replacement...
  view full answer...
• Replacement 2-1/2 Inch Shank for Fastway e2 Weight Distribution System
  You do not need to replace your Fastway e2 Weight Distribution # FA92-00-0800. As you suspected, a new shank is all it will take to get you going again. Fastway doesn't have one for a 2-1/2" receiver, but Equal-i-zer who makes Fastway does. We have the following options available: -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop # EQ90-02-4700 -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop # EQ90-02-4800 -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch...
  view full answer...
• Availability Of a Drop Shank With 2-1/2" Receiver Tube For Equal-i-zer 12,000LB Weight Distribution
  We do offer the 12,000LB Equal-i-zer Weight Distribution System with a 2" Shank # EQ37120ET like you found or with no shank # EQ37121ET. Then you will be able to add one of the 2-1/2" shanks from the list below depending on how much drop you may need. Up to 3" Drop # EQ90-02-4700 Up to 4" Drop # EQ90-02-4800 Up to 6" Drop # EQ90-02-4900 Up to 9" Drop # EQ94FR Up to 12" Drop # EQ34FR
  view full answer...
• Weight Distribution Shank For 2-1/2 Inch Hitch With Drop For Fastway e2 Weight Distribution Hitch
  We have a weight distribution shank with quite a bit of drop that will work your Fastway e2 weight distribution hitch, but the part number you mentioned will not because it is a standard ball mount and doesn't have the correct hole spacing. But we do have an option from Equal-i-zer (who manufactures Fastway) that fits a 2-1/2 inch hitch and offers up to 12 inches of drop: - Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop # EQ34FR This shank has the most drop available...
  view full answer...
• Recommended 2-1/2 Shank For Equal-i-zer Weight Distribution Hitch With Around 10 Of Drop
  You sure can! Weight distribution shanks are not brand specific, you will just need to make sure you use a shank that is the same style as there is two different styles. Based on your picture you will need the # EQ34FR that fits the 2-1/2" receiver on your new Ram 3500 and has 12" drop. The next closest drop available is the # C17132 which has 9-1/4" of drop. I included videos for both of the products mentioned for you to take a look at.
  view full answer...
  
• Weight Distribution Shank for 2-1/2 inch Hitch with A Lot of Drop
  The weight distribution shank we offer for the 2-1/2 inch hitch size that has the most drop is the Equal-i-zer part # EQ34FR which can do a drop of up to 12 inches.
  view full answer...
• Do Curt Weight Distribution Systems Come With Shank to Fit 2-1/2 inch Hitch
  Curt has weight distribution shanks you can use with the # C17501 that fit the 2-1/2 inch hitch size like the part # C17131 which can do up to a 2 inch drop or part # C17132 which can provide up to 8 inches of drop but we do not offer the Curt kits with the 2-1/2 inch shanks. The most similar system that does come with a 2-1/2 inch hitch size shank is the part # EQ34FR which I would highly recommend. It has a tongue weight range of 1,200-1,600 lb, comes with a hitch ball and is widely...
  view full answer...
• Best Equal-i-zer Weight Distribution Hitch for 1,150 lb Tongue Weight and 2-1/2 Inch Hitch
  We can definitely get you set up correctly, and let's start with the Equal-i-zer itself, and this is absolutely the best overall choice for a weight distribution hitch for a number of different reasons. First is its sway control system, which is exceptional relative to other systems because it uses 4 points of sway control via friction in the spring bars and head unit (compared to 2 points on other systems), which ensures you never have to worry about your trailer swaying. It also uses...
  view full answer...
• Shank With Added Drop For Weight Distribution Hitch
  There is a shank with more drop that you can use for your weight distribution hitch; you didn't mention how much you need so I'll give you the options with the most drop. I'll also give you the options for both a 2-1/2 inch and 2 inch hitch so you can choose the size you need (both sizes will fit your weight distribution hitch). - 2-1/2" Hitch, Max 9" Drop: Equal-i-zer Weight Distribution Shank # EQ94FR - 2-1/2" Hitch, Max 12" Drop: Equal-i-zer Weight Distribution Shank # EQ34FR - 2"...
  view full answer...
• Can Equal-i-Zer System for 2 inch Hitch be Adapted to 2-1/2 inch Hitch with Shank Swap
  You will only need to replace the shank of your Equal-i-Zer system with one that fits the 2-1/2 inch hitch size and also provides you with the correct amount of drop to tow your trailer level. Thankfully the heads of weight distribution systems are all the same size and can be used with any hitch size as long as you match them to the correct shank. The shank part # EQ94FR is most likely the correct shank you'd need as it offers up to 9 inches of drop and does fit the 2-1/2 inch hitch size. Other...
  view full answer...
• Availability of 14,000 lbs GTW, 1,400 lbs TW Equal-i-zer Weight Distribution Hitch With 2-1/2" Shank
  Although we do not have one that comes with it under a single product number like the # EQ64FR, it is simple enough to put it together. The Equal-i-zer Weight Distribution # EQ37141ET does not include a shank so you can add whichever one you need. We have the following available for a 2-1/2" receiver: -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop # EQ90-02-4700 -Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900 -Equal-i-zer Weight Distribution...
  view full answer...
• Recommended Weight Distribution Shank for 2-1/2" Hitch Receiver Requiring 6" Drop
  It sounds like you're looking for a weight distribution shank like the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900, which has a 2-1/2" shank and a 6" drop. The length of the drop part of the shank is 11-1/2" long, so it's quite close to what yours is. The next longest shank would be the Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop # EQ94FR.
  view full answer...
• Shanks Available For Equal-i-zer Weight Distribution Hitches To Fit a 2-1/2" Trailer Hitch Receiver
  If you do not want to use a Reducer # C45405 with the 2" shank on the Equal-i-zer Weight Distribution System # EQ37140ET, we do carry the same hitch system with a shank as item # EQ37141ET. Then you will be able to select for the list below of our 2-1/2" shanks depending on the drop you need. Up to 3" Drop # EQ90-02-4700 Up to 4" Drop # EQ90-02-4800 Up to 6" Drop # EQ90-02-4900 Up to 9" Drop # EQ94FR Up to 12" Drop # EQ34FR
  view full answer...
• Shank For Fastway e2 Weight Distribution That Fits 2-1/2 Inch Hitch Receiver
  There are shanks for your Fastway e2 weight distribution hitch that will fit your Ram's 2-1/2 inch hitch receiver, and what you can do is use one from Equal-i-zer, who manufactures the Fastway weight distribution systems. There are a number you can use, with differing amounts of drop. - Maximum Drop of 3 Inches: Equal-i-zer Weight Distribution Shank # EQ90-02-4700 - Maximum Drop of 6 Inches: Equal-i-zer Weight Distribution Shank # EQ90-02-4900 - Maximum Drop of 9 Inches: Equal-i-zer...
  view full answer...
• Equal-i-zer Weight Distribution Shank With 9" Drop And Tongue Weight Capacity Over 1,500lbs
  The Equal-i-zer Weight Distribution # EQ37121ET uses a shank that has bolt holes with a 1-1/4" height adjustments. The Equal-i-zer Weight Distribution Shank # EQ94FR would be ideal to use as it has a 9" maximum drop and fits into the 2-1/2" receiver on your 2019 Ram 2500. It has a maximum tongue weight of 1,600lbs and trailer weight of 16,000lbs. The Equal-i-zer Weight Distribution Shank # EQ34FR has a maximum drop of 12" or a minimum drop of 8-1/4". It has 4 different drop positions...
  view full answer...
• 17 Inch Tall Weight Distribution Shank Recommendation
  The closest weight distribution shank I was able to find is the Equal-i-zer Weight Distribution Shank # EQ34FR that you mention. This shank measures 17" from top to the bottom, fits into 2-1/2" x 2-1/2" trailer hitch receivers, and has a maximum towing capacity of 16,000-lbs.
  view full answer...
  
• 2-1/2 Inch Shank Compatible With Equal-i-zer Rated For 1,200 lb Tongue Weight
  There are definitely 2-1/2 inch shanks you can use that are compatible with your Equal-i-zer Weight Distribution System - 12,000 lbs GTW, 1,200 lbs TW # EQ37120ET. Equal-i-zer makes a number of 2-1/2 inch shanks, so you can simply choose the one you need with the correct rise or drop, and I'll list out their 2-1/2 inch shanks by what the maximum rise and drop is: - 7" Rise, 3" Drop: Equal-i-zer Weight Distribution Shank # EQ90-02-4700 - 8" Rise, 4" Drop: Equal-i-zer Weight Distribution...
  view full answer...
• Recommended Weight Distribution Hitch For 36' 2022 Palomino Puma Pulled By Lifted Ram 2500
  I recommend the Equal-i-zer Weight Distribution # EQ37121ET for towing your 2022 Palomino Puma travel trailer with your 2020 Ram 2500 Power Wagon. This hitch is rated for trailers with a tongue weight of 800-1,200lbs and total trailer weight up to 12,000lbs. To determine the correct drop shank you will need to measure the height of your receiver and compare that with the height of the coupler on the Puma. We have the following drop shanks that will fit your 2-1/2" receiver. 2-1/4" to...
  view full answer...
• Availability of 2-1/2 Inch Shank for Husky Round Bar Weight Distribution System
  The channel width on the weight distribution head of your Husky system isn't hitch specific, so you can use a 2-1/2 inch shank from Equal-i-zer or Curt. I don't know what drop you need, but I'll run you through what we offer right quick; • # EQ34FR from Equal-i-zer, max 12 inch drop • # C17131 from Curt 3-1/4 inch drop for round bars • # EQ90-02-4700 from Equal-i-zer, up to 3 inch drop • # EQ94FR from Equal-i-zer, up to 9 inch drop • # EQ90-02-4900 from Equal-i-zer, up to 6 inch drop •...
  view full answer...
• Weight Distribution Hitch Shank For 2-1/2 Inch Hitch With at Least 10 Inches of Drop
  Yep; since you have a 2-1/2 inch hitch receiver and you need at least 10 inches of drop, the correct weight distribution shank that will fit your hitch and also give you the correct amount of drop is indeed from Equal-i-zer, and is the following part number: - Equal-i-zer Weight Distribution Shank # EQ34FR
  view full answer...
• Availability of Fastway FA92-02-4315 Weight Distribution Shank in Version for 2-1/2 Inch Receiver
  We offer couple of 2-1/2 inch weight distribution shanks that could work for you. If up to a 9-1/4 inch drop/12 inch rise would work for you, then I'd recommend the Curt # C17132 shank. If you need more rise or drop than that, the Equal-i-zer # EQ34FR would offer up to 15 inches of rise or 12 inches of drop. If you don't need quite as much height adjustbility that's offered with the # FA92-02-4315, the Equal-i-zer # EQ90-02-4900 which offers a rise up to 10 inches and a drop of 6 inches...
  view full answer...
• Will The Curt Weight Distribution Head Fit Onto A Equalizer Shank?
  Yes, The head of The Curt TruTrack Weight Distribution System # C17499 will work with The Equal-i-zer Weight Distribution Shank # EQ34FR. The shank has a 12 inch drop and is constructed of sturdy steel which is dipped for corrosion resistance. The maximum tongue weight of the shank is 1,600 pounds and has a maximum gross towing weight up to 16,000 pounds. I attached a review video link below.
  view full answer...
• Replacement Drop Shank for Weight Distribution and 2-1/2 Inch Receiver
  The Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW # RP54977 is a fit for your system. The Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitches - 9" Long - 9 Hole Adjustment # BXW4028, the Curt Weight Distribution Shank for 2-1/2" Hitches - 12" Rise - 9-1/4" Drop # C17132, the Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop # EQ34FR, and Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop # EQ94FR are all...
  view full answer...
  

Do you have a question about this Accessories and Part?