Dexter Heavy-Duty Suspension Kit Installation - 2021 Coachmen Apex Ultra-Lite Travel Trailer Video

The Dexter Electric Trailer Brake Assembly #23-429 & #23-428 have a center opening of 3-7/8" for fitting on the axle tube. It will mount to bolt holes that are 3-5/8" spread left to right and 4-3/8" top to bottom. I have included…

It sounds like you may have one of 2 things going on inside your wet bolts. I have seen some instances where some particles/dirt get inside the wet bolt and clog the weep hole the grease is allowed to pass through. You can remove the bolts not taking…

The weight of a trailer is transferred evenly by the equalizers to the suspension system(springs, shackles and hangers), and the equalizers do not have a weight capacity listed. The equalizer allows for a smooth transfer of impact caused by rough or…

Thank you for all that info, and replacing the equalizers, as well as upgrading the suspension hardware is going to be the best option for you. The correct size equalizer, as well as the suspension kit that I recommend is the following: - Curved…

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

Yes the Suspension Kit for Tandem-Axle Trailers #e99ZR that you referenced can be used with 5,200 lb trailer axles.

It sounds like you need the Suspension Kit for Tandem-Axle Trailers part #e99ZR which contains 7-3/4" long equalizers, 9/16" bolts, and 3-1/8" long shackle straps. The kit is designed for 1-3/4" wide leaf springs. I would be…

The trailer lift kit options really come down to the axle type and setup. For leaf spring axles, you can either flip the axles with a kit like part #K71-384-00 or part #K71-385-00 or you can raise the hangers/shackles with a kit like part #LC425750.…

To get the correct replacement brake drums for your 8,000 pound axles, you will need a few things to be verified. The first will be if they are are hydraulic or electric brakes. If they are hydraulic, we currently have the Dexter Hydraulic Drum Brake…

The Replacement Trailer Brake Magnet for 12" Brake Assemblies #BP01-180 will fit old Hayes AL-KO brake Assemblies that are 12x2 inches. They fit 6K and 7K assemblies after 1988. For the 7.2K and 8K oval you would want the Trailer Brake Magnet…

Brake magnets are made to fit their specific brake assemblies. They are not made to be interchangeable between brake sizes or weight capacities. Some manufacturers do use different color magnet wires that correspond to the capacity. We know that…

When lining up the axis of the wet bolts it does not matter if the 90 degrees is forward or back. As long as it's either you are good!