Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
Question:
What is the diameter of the center hole on the # 23-429, and 23-428 brake assembly? I am trying to replace my 23-369 and 23-370 brakes with a 9 hole mounting plates? Any information or ideas to repair or replace my brakes without replacing my axels would be greatly appreciated. Thank you
asked by: Joel F
Expert Reply:
The Dexter Electric Trailer Brake Assembly # 23-429 & # 23-428 have a center opening of 3-7/8" for fitting on the axle tube. It will mount to bolt holes that are 3-5/8" spread left to right and 4-3/8" top to bottom. I have included images below with both measurements to help you identify the fitment. We also have them as a Set # 23-428-429 since you will will being replacing them on multiple axles. If these will not fit your current axles please let me know your mounting pattern and the center hole diameter required.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 12-1/4" - Left Hand - 7,200 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 7200 lbs
- Brake Assembly
- Manual Adjust
- 12-1/4 x 2-1/2 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brakes - Parking Brake Ready - 12-1/4" - Left/Right Hand - 7.2K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12-1/4 x 2-1/2 Inch Drum
- 7200 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12-1/4" - Right Hand - 7,200 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 7200 lbs
- Brake Assembly
- Manual Adjust
- 12-1/4 x 2-1/2 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 12-1/4" - Left/Right Hand - 7.2K
- Video: Review of Timken Trailer Bearings Races Seals Caps - Double Lip Grease And Oil Seal - TMK38ZR
- Search Results: magnet
- Shop: Dexter Electric Trailer Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 8,000 lbs
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Trailer Brake Magnet For Dexter 12-1/4 Brake Assembly, White Wire
- Video: Review of Timken Trailer Races - Replacement 25520 Race - TMK76FR
- Shop: 12-1/4" x 2-1/2" Brake Shoe and Lining for Dexter - LH
- Shop: 12-1/4" x 2-1/2" Brake Shoe and Lining for Dexter - RH
- Search Results: 23~428~429
- Q&A: Looking For Drum Brakes That Fit An 8,000 Pound Axle
- Search Results: 25580
- Video: Redline Trailer Brakes BP01-265 Review
- Search Results: 14125
- Search Results: k71~378~00
- Search Results: bp01~255
- Search Results: timken 25580
- Q&A: Do the Colors of Trailer Brake Magnets Mean Anything
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation - 5th Wheel
- Video: Review of Dexter Trailer Brakes - Electric Drum Brake Assemblies - DX32QR
- Video: Review of etrailer Trailer Fenders - Tandem Axle Fenders With Backing Plates - HP92VR
- Video: Review of Dexter Axle Trailer Brakes - Replacement Brake Shoes - BP04-238
- Q&A: Mounting Hardware For Dexter 8,000 lb Electric Trailer Brakes
- Q&A: Replacement Brake Assemblies For Dexter 8,000LB Axle On Big Tex 16ET Trailer
- Q&A: Recommended Trailer Brake Kit For Gatormade Aardvark With 8k Dexter Axles
- Q&A: Replacement 12-1/4" X 2-1/2" Electric Brakes For a Dexter 8,000LB Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Backing Plate for Electric Brakes on 10k Axles
- Shop: Trailer Hitch