Dexter Heavy Duty Suspension Upgrade Kit Installation - 2021 Grand Design Imagine Travel Trailer Video

It depends on the leaf springs you are using. Basically you will need to mock it all up before permanently installing anything on the trailer. Generally speaking the distance between hangers would likely be 24-3/4 inches on center to 29-1/2 inches on…

Since you said your current EZ Flex Equalizers are 7-3/4 inches from bolt hole center to bolt hole center the correct replacements you'd need is the part #K71-655-00.

When lining up the axis of the wet bolts it does not matter if the 90 degrees is forward or back. As long as it's either you are good!

The SRE4000 is quite a big improvement over the CRE3000. The SRE4000 provides more suspension travel (4" Vs. 3"), greater road shock absorption, a longer warranty (3 Yrs. Vs. 2 Yrs.), and much more. We also offer the SRE4000 with an…

For side to side stability on your camper the SumoSprings like #TSS-107-40 is going to be the bigger improvement than an upgraded equalizer. An upgraded equalizer will basically cushion the ride quality but it won't make a significant change in…

There would be no issues with using the SumoSprings like the #TSS-107-40 with the Road Armor or MORryde Upgraded equalizers. With that being said, I would upgrade your equalizers first, and I think you will find that they will provide the suspension…

If there is a tiny bit of play in suspension components that are designed to move you would be fine. 1/16 of an inch isn't very much, and as long as you torqued everything down to spec you would be good to go. Ideally we just don't want it…

Hangers do not all have to be the same height, no; the center hangers are longer because they work as a link with the equalizer between your axles. I recommend checking out your U-bolts to make sure they weren't somehow bent, cracked or otherwise…

I have attached for you below all the parts you requested for your 2019 Grand Design Reflections 303RLS. 5-Leaf Double-Eye Spring part #e34SR MORryde Suspension Upgrade Kit for Tandem Axle Trailers part #MR46ZR MORryde Shock Absorbing Suspension…

The replacement leaf spring that I have available to fit your 6,000 pound axle is the 5-Leaf Double-Eye Spring, #e34SR. This spring measures 25-1/4 inches long by 1-3/4 inches wide. In order to ensure proper traction and a safe, level ride, we…

Thanks for the photo. You will not have any issue using the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs #K71-449-00 and moving the equalizer bolt down to the lower hole position. This will work very…

I do have options for you but we would not have a direct replacement for your 3,500 Lb Lippert Axle. Instead, we have the Timbren Axle-Less Trailer Suspension System part #ASR3500S05 or part #ASR3500S06 which as the title states is an axle-less style…