CE Boat Trailer Rollers Panel Bracket Installation Video

Best solution I can make for you would be to have some perpendicular cross beams welded (by a qualified welder), so that you can install the roller bunks part #DL21741 that you referenced like in the picture I attached. You will also need the install…

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…

I went out to the warehouse and pulled a CE Smith U-Bolt, part #CE15252A and took some measurements for you. The threaded portion is 2-1/16". The outside width is 4". The outside length is 3-1/8". Check out the photo of the U-Bolt…

Since you've got a boat trailer, you'll want to use something that offers a good level of corrosion resistance. We have two different u-bolts that would work for you, one that's zinc plated #CE15252A and one that's stainless steel,…

The Dutton-Lainson Roller Bunk Bracket, part #DL21742, fits Dutton-Lainson Roller Bunks #DL21740 and DL21741. Four are needed to mount a pair of roller bunks. My contact at Dutton-Lainson advises that u-bolts are not specifically required to install…

I have attached a picture that shows the dimensions of the CE Smith Spool Roller Assembly for Boat Trailers item #CE32100G. It measures 2-1/4-inches from the bottom of its mounting plate up to the center of the rubber roller. Overall width is…

Although not an exact match, the part #PF1135-BKT-2 brackets would work well for mounting the fenders onto a boat or other open sided trailer. The brackets use U-bolts that attach to the trailer frame, the fenders then mount to the brackets as shown…

The Fulton Single Axle White Plastic Trailer Fender with Top and Side Steps #F008572 that you referenced is intended for trailers that use 12-inch diameter wheels. This USA-made fender has a 300-lb weight capacity. The other fender you referenced,…

I have a replacement option for you, but the only slipper spring we offer that is 1-3/4" wide and is 26-1/4" long is the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long #e33SR. Since you mentioned that…

The CE Smith Roller Bunks for Boat Trailers part #CE27710 are 5' long so as long as these are close to the same length of the bunk boards you have on your trailer now they will work well for you. The CE Smith Roller Bunks for Boat Trailers are is…

Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part #CE27710 installed. For a set of swivel…

I recommend the Demco Channel Tongue Trailer Coupler #DM13689-52. I have included (below) a picture of the bolt measurements for you to compare for your trailer. It is made of sturdy steel with a silver powder coat finish, making it ideal for marine…