CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32150G Review Video

I went out to the warehouse and pulled a Offset Spool Roller Assembly, #CE32150G. Measuring from the bottom of the base to the top of the roller in the center section it is 3-3/8 inches. From the bottom of the base to the taller part at either end is…

I went out to the warehouse to measure the internal width of CE Smith roller #CE32110G. It measure 1-7/8 inches. I have included a picture showing this measurement for you.

We don't offer a flat roller assembly, but the 5 inch #CE10401G assembly has a roller that's more flat that might work well for you. The flatter profile would spread more of the boat's weight out over a larger area.

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

The CE Smith U-bolt #CE15253A could be used to mount the CE Smith Offset Spool #CE32150G. The diameter of the u-bolt and the mounting bracket of the offset spool are both 7/16 inch, and are compatible. I have included a video demonstration of the CE…

The best matching option we have is the part #e29SR which is for an 1,800 lb trailer axle and is overall 30 inches long.

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on…

The CE Smith Offset Spool Roller Assembly #CE32150G that you referenced, as well as the other similar products shown on the link provided, all mount using user-supplied hardware. These are intended to bolt on directly, without U-bolts but rather with…

For the Roller part #CE32100G that your referenced the distance from the mounting surface up to the top of the roller measures 3-5/8 inches. The roller part #CE32150G that you referenced instead measures 3-3/8 inches.

Yes, you would want the hangers used for installing the Slipper Springs part #SP-179275 that you referenced to be 23-1/8 inches apart when installing these springs on your trailer. I attached a review video for you to check out and a help article on…