Review of etrailer Straight Tongue Trailer Coupler - Standard Coupler - CT-3001-Z Video

The 4 on 4" bolt hole pattern for the Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel #AM3S030 is a little bit larger than a 4 on 100mm bolt hole pattern so they aren't interchangeable unfortunately. We typically try to…

Between the bolt holes of coupler #CT-3001-Z I measured the same 3-1/16 inch. They're also 1/2 inch holes like yours. From the top to the center of the holes I measured about 1-5/16 to maybe even 1-3/8 inches. With that being said measuring from…

It would depend on the measurements of your trailer's tongue to find an exact fit. One of our most popular couplers, #CT-3001-Z, is 10-3/4 inches long by 3-1/2 inches wide and is for 2 inch trailer tongues. The mounting holes are 1/2 inch…

I went out into our warehouse and measured the bolt holes of the Trailer Coupler #DL13800 that you referenced and found them to be about 1/2 inch space 3 inches on center. Check out the video I put together that shows taking this measurement. If you…

For a 4-pole round trailer connector and socket, I would recommend looking at the Pollack Heavy-Duty 4-Pole Round Trailer Connector, #PK11409, and the Pollack Heavy-Duty 4-Pole Round Trailer Socket, #PK11410. The connector and socket have a…

The housing is ABS, a thermoplastic for the Optronics LED Trailer Clearance and Side Marker Light - Chrome Plated - 6 Diodes - Amber Lens #MCL81AB. If that's what you were looking for, there is also an option with a red lens, the LED Clearance…

We have trailer LED tail lights that similar to the Wesbar lights with a driver side license plate bracket that is a bit narrower than the top of the light. The light is from Optronics and measures 7-1/2 inches wide on top and the license plate…

It is certainly possible to replace a welded-on coupler with a bolt-on type so long as the new coupler's capacity is correct for the trailer and it fits the trailer tongue. If you know the trailer manufacturer it is never a bad idea to check with…

You would want to use 2, 1/2 inch diameter bolts that are 4 inches in length. I pulled a Fulton Fas-Lok Coupler #F343000301 and checked the installation instructions to confirm the bolt recommendations.

Yes, you just have to remove the old lights, match the wires and mount the new ones. Please note, that it is usually not a good idea to mix LEDs and incandescent lights, so if you have have side markers or other lights on the trailer, make sure you…

We do offer the Karrier ST175/80R13 Radial Trailer Tire #AM10210 separately from the Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel #AM32001HWTB.

Lug nuts are not included with our trailer wheel and tire combos like the Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel #AM32001HWTB that you referenced as not everyone needs them, so it allows us the ability to not have to…