Availability of Karrier ST175/80R13 Radial Trailer Tire Load Range D

Question

Question:

I would like to purchase 5 Karrier ST175/80R13 Radial Trailer Tires load range D. Do you sell these tires without wheels?

asked by: Brian G

0

Expert Reply:

We do offer the Karrier ST175/80R13 Radial Trailer Tire # AM10210 separately from the Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel # AM32001HWTB.

expert reply by: Bud M

0

Answer 1

It is certainly possible to replace a welded-on coupler with a bolt-on type so long as the new coupler's capacity is correct for the trailer and it fits the trailer tongue. If you know the trailer manufacturer it is never a bad idea to check with…

view full answer...

Answer 2

Lug nuts are not included with our trailer wheel and tire combos like the Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel #AM32001HWTB that you referenced as not everyone needs them, so it allows us the ability to not have to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 11

The closest radial tire size I would have to replace the 4.80-12 bias tire size is the Kenda Karrier S-Trail ST145R12 Radial Trailer Tire #AM10130. The 4.80-12 bias tire is 20.7 inches tall and 4.9 inches wide. The 145R12 radial tire is 21.3 inches…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Availability of Karrier ST175/80R13 Radial Trailer Tire Load Range D

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching