etrailer Channel Tongue Trailer Coupler Review Video

Possibly, but we don't have any way of knowing what fenders are on your cargo trailer or a way to look up a VIN. To find the right fender you need to know your wheel size and also measure your current fenders to get the closest possible…

The shackle straps need to be placed on the outside of the rear leaf spring hangers which you can see in the attached photo. Furthermore, the distance between the two mounting plates (inside to inside) on your leaf spring hangers should be…

The 60/40 axle placement formula is a great starting point and does take into account the tongue of the trailer from where the trailer sits on the hitch ball. Please keep in mind that this is a very basic formula or estimate for axle placement. For a…

I contacted CE Smith to verify the sizing, and the center hole on the #CE20015G is 7/16". They also verified the 4 holes around the edges are indeed 3/8" as well. The 1 3/4" is referring to the diameter of the axle and width of the…

The Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs #ASR3500S05 has a deflection of 1-3/4 inches. I've attached a photo to assist. We recommend 4 inches above the tire in most cases for fender mounting to account…

Thanks so much for the photo, and there is an option for fenders you can install on your trailer with its 14 inch wheels: - Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels #HP36VR You can either have these welded…

I do have an option but Shelby Trailer Products went out of business years ago so replacement parts are just not an option. Therefore, you will need to cut the old coupler off and then bolt-on a new one for which I recommend the Channel Tongue…

The distance between the mounting holes on the coupler part #CT-2003-Z is 2-1/4 inches like what your old coupler has so this will be a direct replacement.

Yes, we have channel-mount style couplers for 1-7/8 inch hitch balls like the part #CT-2003-Z. This is a bolt-on coupler that fits a 3 inch wide channel.

Shoreliner made the Highlander Boat Trailers and they went out of business several years ago so the VIN cannot be used to determine the axle capacity. However, if the gross vehicle weight rating (GVWR) of your trailer is only 2,120 lbs then it would…

No, the hole spacing on coupler #CT-3001-Z is actually 3-1/16 inches as measured by our video demonstrator in the video I have linked. The holes for coupler #CT-2001-Z are spaced 2-1/4 inches apart on center.

For a 4-pole round trailer connector and socket, I would recommend looking at the Pollack Heavy-Duty 4-Pole Round Trailer Connector, #PK11409, and the Pollack Heavy-Duty 4-Pole Round Trailer Socket, #PK11410. The connector and socket have a…