Review of etrailer 1-1/4" To 2" Receiver Adapter With 6-1/2" Extension - e43YR Video

The dimension you are looking for is 4-3/4 inches.

There are two good recommendations for you but I would not recommend using a hitch adapter to carry a 2 inch shank cargo carrier in a 1-1/4 inch hitch. The reason is that the adapter reduces the hitch tongue weight capacity by 50 percent, and you…

All of the 1-1/4 inch hitch mounted cargo carriers we have available do feature a fixed shank that won't allow the carrier to tilt up to a folded position when not in use. With this in mind your only option to install a tilting cargo carrier on…

The concept of a hitch adapter like the Brophy #HTAD is a good idea in theory but the problem with using one of those with a 1-1/4" hitch, like part #C11265 or #24913 for your 2015 Toyota Corolla, is that it will reduce the weight capacity of…

Yes, there is an attachment that will allow the Curt Cargo Carrier #C18151 to swing away from your vehicle tp access the trunk of your 2016 Ford Expedition. I recommend adding the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2"…

I checked with CURT and the Trailer Hitch #11317, will fit a 2011 Subaru Impreza WRX with dual exhaust. I have included a link to the installation instructions for you to view. If you plan on doing some towing, the hitch comes with a ball mount, pin…

I recommend getting a cargo carrier with the folding feature like the 20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs #C18151. The distance from the center of hitch pin hole to the closest edge of the carrier when folded up…

I am happy to help you find a cargo carrier that will work with your 2005 Mini Cooper, but we do not carry an adapter that is compatible with the Cooper's limited hitch access. From my research your best option is to use a 1-1/4" carrier…

The use of an adapter, like #HTAD, to use a 2 inch accessory in a 1-1/4 inch hitch can be done. However, you will reduce the tongue weight capacity of the hitch by 50 percent. For example if your hitch has a tongue weight rated at 200 pounds, by…

To retain your current hitch, you could use the #63153 Reese 24x60 carrier in the adapter you have installed already, but because the extender moves the load of the carrier and what's carried upon it further away from the hitch, using the adapter…

The receiver hitch for the 2011 Subaru Impreza four door sedan is the EcoHitch Invisi Trailer Hitch Receiver item #306-X7279. This fits the WRX and WRX ST models. The Curt Trailer Hitch Receiver item #C11120 you referenced is a confirmed fit for a…

I have a solution for you. Since we don't carry a folding cargo carrier for 1-1/4 inch hitches, the best route is to use a hitch adapter like the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only) #80303 with a 2-inch…