Curt Trailer Hitch Receiver Adapter Review C45785 Video

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

When you use an adapter in a trailer hitch it decreases the capacity of the trailer hitch by 50 percent. Also, a 1-1/4 inch trailer hitch will only allow you to be able to carry 2 bikes. If you are carrying 2 bikes on your vehicle I recommend part…

I have a solution for you, but the distance from the hitch pin hole of the Curt adapter part #C45785 to the back of the hitch opening is 2.55 inches so it would not be deep enough for your bike rack. Instead we have the Brophy hitch adapter part…

There are no Class lll trailer hitches with a 2 inch receiver opening available for your 1989 Land Cruiser. The only trailer hitches that are available are all 1-1/4 inch receivers. Depending on the capacity of your trailer hitch you may be able to…

To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…

The adapter you need to install on the 100 lb tank is the part #204128-MBS. This will thread onto the tank and give you the correct fitting for your ACME type 1 pigtail to connect to.

Since the Curt Carrier part C18152 that you referenced doesn't fold, I would recommend the etrailer brand folding carrier #e98874. This is also a 24 x 60 inch cargo carrier with a 500 lb capacity that folds and should work well for you for both…

I have a couple options that you can consider for your Champion Dual Fuel Generator. First is the simplest as everything can be easily attached to your current hose and regulator. The MB Sturgis Sturgi-Stay T-Fitting w Hose #103615 will add a tee…

I spoke with my contact at Rola and he stated that the Railed Cargo Carrier, #59507, has a solid shank. You can still use an anti-rattle device with a solid shank accessory. I recommend the No-Rattle Trailer Hitch Wedge, #MPG908. I have included a…

You will need to check your 2023 Volkswagen ID.4 S Pro Plus to verify the Curt Trailer Hitch Receiver #C57JR can be installed. I have linked the installation instructions below showing where the mounting plate is for the factory receiver this is…

We actually have exactly what you are looking for; a 2 inch trailer hitch receiver to replace the 1-1/4 inch factory receiver on your 2021 Volkswagen ID.4: - Curt Trailer Hitch Receiver #C57JR I have added a cut out of the installation instructions…

All of the hitch options for your 2022 Volkswagen ID 4 have the same max tongue weight rating of 300 lbs. The tongue weight rating is the one that is of concern when using a bike rack. I recommend you use the Curt Trailer Hitch Receiver #C57JR…