CURT Hitch Cargo Carrier Review - 2018 Toyota Highlander Video

The Xtreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW350D does not come with the bearings installed. You can use something like a rubber mallet or a block of wood and hammer to tap them into place until they are flush.

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I have a solution for you. Since we don't carry a folding cargo carrier for 1-1/4 inch hitches, the best route is to use a hitch adapter like the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only) #80303 with a 2-inch…

I recommend getting a cargo carrier with the folding feature like the 20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs #C18151. The distance from the center of hitch pin hole to the closest edge of the carrier when folded up…

Yes, there is an attachment that will allow the Curt Cargo Carrier #C18151 to swing away from your vehicle tp access the trunk of your 2016 Ford Expedition. I recommend adding the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2"…

The use of an adapter, like #HTAD, to use a 2 inch accessory in a 1-1/4 inch hitch can be done. However, you will reduce the tongue weight capacity of the hitch by 50 percent. For example if your hitch has a tongue weight rated at 200 pounds, by…

I checked with CURT and the Trailer Hitch #11317, will fit a 2011 Subaru Impreza WRX with dual exhaust. I have included a link to the installation instructions for you to view. If you plan on doing some towing, the hitch comes with a ball mount, pin…

The concept of a hitch adapter like the Brophy #HTAD is a good idea in theory but the problem with using one of those with a 1-1/4" hitch, like part #C11265 or #24913 for your 2015 Toyota Corolla, is that it will reduce the weight capacity of…

All of the 1-1/4 inch hitch mounted cargo carriers we have available do feature a fixed shank that won't allow the carrier to tilt up to a folded position when not in use. With this in mind your only option to install a tilting cargo carrier on…

I am happy to help you find a cargo carrier that will work with your 2005 Mini Cooper, but we do not carry an adapter that is compatible with the Cooper's limited hitch access. From my research your best option is to use a 1-1/4" carrier…

To retain your current hitch, you could use the #63153 Reese 24x60 carrier in the adapter you have installed already, but because the extender moves the load of the carrier and what's carried upon it further away from the hitch, using the adapter…