Review of Titan Straight Tongue Trailer Coupler - Standard Coupler - T4845000 Video

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

The Titan Zinc-Plated, Leverlock Coupler #T4845000 that you referenced is designed to fit on a trailer tongue that measures 3 inches wide. If you measure the width of the insert portion of your surge coupler and it's 3 inches wide this will…

No, the 2017 GMC Sierra 1500 did not come with the temperature sensor in the passenger's side mirror. The temperature sensor is only present on models with the V8 Duramax engine from 2014+. Since the 1500 models did not come with the Duramax…

The Titan Zinc-Plated, Leverlock Coupler #T4845000 measures 4-1/8 inches tall, so it looks like it may be too tall for your set up. If so, the only other 5,000 lb coupler for a 2" hitch ball that may work is one that has half of the height, the…

I attached a picture that has all of the dimensions you requested for the Titan coupler part #T4845000 that you referenced.

The electric lockout doesn't do anything to the actuator itself, it is a solenoid that doesn't let the fluid pressurize to case the wheel cylinder or brake caliper to engage. The coupler not returning to the forward location has more to do…

The Master Lock Adjustable Trailer Coupler Lock #2847DAT is a great lock to use to lock the yoke style coupler you sent in a picture of. I attached a picture of it used to lock a coupler just like yours for you to check out as well.

The only trailer jack we can recommend that would fit on the same frame mount as your 2012 Ranger trailer that has a Dutton Lainson jack currently is another DL jack like with the part #DL24MR since all of the jack manufacturers use slightly…

I took a look at the Ranger R71 Boat Trailers and the Fulton Bolt-Thru Swivel Marine Jack w/ Caster part #FXP10 will be an excellent bolt-on option for this. The 10" lift should be plenty to raise the tongue up for coupling and the bracket range…

All of the Fulton bolt-on swivel jacks fit 3x3 to 3x5 frames but none for a 5-1/2 inch frame. You would need to look at weld-on jacks such as #FTJ120W0301. If your Ranger boat trailer has an aluminum frame then it will require a professional with…

Yes, I do have the exact dimensions you need of the Demco Channel Tongue Trailer Coupler part #DM15945. I have attached these for you below.

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…