Stromberg Carlson Camper Jack - Leveling Jack - JSC-24-IND Review Video

I spoke with my contact at Stromberg Carlson about replacement parts for the scissor jacks we offer like part #JSC-24-IND, and they told me they do not offer any replacement parts. I recommend replacing your current jack with the #JSC-24-IND. This is…

You can use the Marine Battery Switch #277-000403 for your application but since this item is not rated for outdoor use I recommend using a junction box like #3375601100 to provide a degree of protection from moisture. The switch housing (not…

Thank you for including your photo. I pulled the Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs #LC285325 from our warehouse and measured across (right over the Stabilizer Jack sticker pictured) and this jack provides the 2-1/4" of…

The mounting brackets for the scissor jacks we offer do vary. I went to the warehouse and took some measurements of the Lippert Components 24 inch Scissor Jack, part #LC285325. I have attached a photo of the mounting brackets with the dimensions…

I have a solution for you, but when I called Lippert to confirm the size of the bolt on the Lippert Components Scissor Jack #LC285325 they informed me that this particular jack should not be raised or lowered using a power tool, but it does have a…

There is not a specific capacity for the Lippert Scissor Stabilizer Jack #LC285325 at 6 inches to 8 inches high; they simply have a 5,000 lb capacity per the manufacturer. I have added a link to a video review as well of the Lippert Scissor…

The term PC-Rated in reference to trailer lighting means Photometrically Certified. What this means in actual practice is that a light fixture is viewable from a 90-degree angle. Other non-PC-rated lights are considered to be viewable from a 45…

We actually have a handy help article, linked to the right for you, that explains this and other helpful information on trailer lights. Below is an excerpt: The light beam emitted from a P2 or P3 light spreads out 45 degrees to each side of its…

The Tire Linc TPMS for RVs and Trailers part #LC37VR comes with a repeater dock which will be used to power the repeater. However, if you have a model that is setup for this system then there will already be a repeater dock installed and wired up so…

Scissor jacks such as #JSC-24-IND used for stabilization of a trailer/RV can be welded or bolted on. However, if you choose to weld them on using a professional welder is recommended. There is no specific way they have to be placed. I have seen them…

The support capacity of the scissor jacks are for each jack individually. So the part #UF48-979031 comes with two jacks that are each rated for 6,500 lbs. So you'd multiply that by how many jacks you end up using

The manufacturer does not have a schematic for the Stromberg Scissor Jack #JSC-24-IND, so I went to the warehouse and pulled one and came up with the following dimensions which I have noted in the attached picture.