Does Lippert Scissor Stabilizer Jack Have a Capacity at Different Heights

Question

Question:

What is the stabilizing capacity for part # LC285325 at 6-8inch high? Or how much can this leveling jack support at 6-8inch high?

asked by: Anthony

0

Expert Reply:

There is not a specific capacity for the Lippert Scissor Stabilizer Jack # LC285325 at 6 inches to 8 inches high; they simply have a 5,000 lb capacity per the manufacturer.

I have added a link to a video review as well of the Lippert Scissor Stabilizer Jack # LC285325.

expert reply by: Kyle S

0

Answer 1

The mounting brackets for the scissor jacks we offer do vary. I went to the warehouse and took some measurements of the Lippert Components 24 inch Scissor Jack, part #LC285325. I have attached a photo of the mounting brackets with the dimensions…

view full answer...

Answer 2

Thank you for including your photo. I pulled the Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs #LC285325 from our warehouse and measured across (right over the Stabilizer Jack sticker pictured) and this jack provides the 2-1/4" of…

view full answer...

Answer 3

I have a solution for you, but when I called Lippert to confirm the size of the bolt on the Lippert Components Scissor Jack #LC285325 they informed me that this particular jack should not be raised or lowered using a power tool, but it does have a…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 6

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 9

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Does Lippert Scissor Stabilizer Jack Have a Capacity at Different Heights

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching