Review of Redline Trailer Leaf Spring Suspension - Spring Mounting Hardware - AP216-H238 Video

All of the brake hoses, including the main brake line, are made of rubber on the 20 foot Kodiak Hydraulic Brake Line Kit - Tandem Axle #20TA-BLKIT. The hoses on the #20TA-BLKIT also have brass fittings with stainless steel flares.

There isn't a specific distance the hangers have to be for hanger kit #AP216-H238. A good place to start is 30-1/2 inches on center but you would only really know by mocking it up on the trailer before permanently installing the hangers. To…

The reference to 4 leaf springs is the quantity of leaf springs the Tandem-Axle Trailer Hanger Kit, part #AP216-H238. Since it is for a tandem set up you would need to use 4 different leaf springs that are designed for axles up to 8,000 lbs…

When using trailer suspension hanger kit #AP216-H238 with spring E5115, #e39SR, the distance from the center of the front hanger to the center of the middle hanger AND the distance from the center of the middle hanger to the center of the rear hanger…

I would need to know the axle capacities to be sure but I can venture an educated guess. The only tandem axle double-eye leaf spring hanger kit we have that includes 8 inch equalizers is #APT1. With this kit, the center of the forward hanger to the…

Yes, both special trailer (ST) and light truck (LT) tires can be used on a 5th wheel trailer. They are actually the only two types of tires rated for this use. The reason for this is that tires on a trailer will be subjected to much harsher…

The Dexter Trailer Hub and Drum Assembly #8-219-4UC3 fits a standard #42 Spindle #TRU57FR. While the Dexter Trailer Hub and Drum Assembly #8-219-4UC3-EZ fits a E-Z Lube #42 Spindle #TRU37FR. You will need to select the appropriate assembly based on…

Based on the number you listed the correct hub/drum you need is the part #8-219-9UC3 which is a Dexter hub for 5,200-7,000 lb trailer axles that have an 8 on 6-1/2 inch bolt pattern.

Yes it does, what you will need are 1/2"-20 self-tapping bolts in order to install the bracket you asked about: - Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 #LC349975

So it sounds like it is the "passenger's" side of the trailer which would be the right side. That would mean rear leg #LC344792 is the correct replacement for you.

If your Jayco Pinnacle was equipped with the Lippert Hydraulic Ground Control Leveling System (which should be listed on the control panel), then yes the #LC324269 you'd looked at would be the correct replacement foot pad. If you're unsure of…

Installing brass bushings of the proper inner and outer diameter and length is possible. In my experience brass bushings do not last any longer than nylon bushings and they are much harder to find in the correct size. At this time we do not carry…