Redline Trailer Suspension SP05-080 Review Video

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

Many of the ball mounts we offer that we offer that fit 2 inch receivers like part #2753 which has a 2-3/4 inch rise or 4 inch drop, that are designed to be able to use in a rise or drop position by simply turning it upside down, without losing any…

There isn't a pintle adapter for ball mount #C45902 rated for 21,000 pounds but I may have a solution for you. What you could do is use ball mount plate #337PM25812 with Convert-A-Ball pintle hook combo #PH1. When used as a pintle hitch the…

Yes, if you'd like you can adjust the CE Smith Narrow V-Wing Bolster Bracket for Pontoon Boat Trailers #CE26265G40 along the frame.

The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…

Your drum/hub that is the Dexter 8-147 part number should have an inner bearing #LM48548, an outer bearing #L44649, and a grease seal #58846. If this is the case then we do have some hub/drum assemblies that would work great for your application. The…

The picture with the torn up bushing looks like the eye of your slipper spring. Is that correct? If so, it is coming undone and probably the reason you're having this problem. It should be enclosed and not look similar to the hook on the end of…

The Center Hanger for TruRyde Equalizer #TRHG291-C is specifically designed to be used with the Equalizer for 2" Wide Slipper Springs #TREQ4541. This is designed to work with trailer axles from 6,000-8,000lbs. The Redline Center Hanger for…

Thank you for all of the good info! Since mobile home axles are just meant to be used once we want to focus on weight capacity and fit with your trailer frame to make sure we get something that is a good replacement. I'm guessing that when you…

To be honest the brakes that were on your Lippert 5.2K axles were probably from Dexter Axle as they are the most common brakes on any trailer. Since your OEM brake controller on your Ram pickup worked with the old brakes it isn't likely that all…

Tire size 4.80-12 is not found on vehicles, but is a common trailer tire size on smaller utility- and sport-type trailers. In trailer use you do want to inflate them to the maximum cold psi pressure noted on the tire sidewall. Trailer tires should…

You always want to keep your trailer tires psi set to what is recommended. If the psi is higher or lower then the tire will not perform as the manufacturer states. For instance, the Kenda #AM30670 is rated for 990 lbs at 90 psi. If we were to deflate…