Review of Redline Replacement Trailer Hub Wheel Stud - 165981 Video

Hello Dave. I recommend the DeeMaxx Disc Brake Kit #DE28YR. This uses a corrosion-resistant Maxx coat finish, which is similar to Dacromet or Zinc only better. So not as expensive as stainless, but still good rust resistance. These hubs have a 6 on…

The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…

Yes, the brake pads that come with the DeeMax disc brake kit part #DE22FR are stainless steel backed. For replacements you'd want the part #DE98VR.

We actually have the Replacement ECU Service Pack #F69VV which is designed to replace the F3 controller. This way you will not have to replace your harness and only need to replace the ECU.

I have to go off the GM dealership recommendation. If they are saying you need the Hydrastar #HBA-CAM or Dexter #DX35FR adapter module for your factory brake controller to work with your electric over hydraulic brake actuator, then I can't really…

The Replacement Rubber Piston Seal #DE35FR has an outer diameter of 2-1/2" with a thickness of 1/8".

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

It may be possible to change your studs from 1/2" to 9/16" so long as the studs are drive-in (as opposed to threaded); also, the length and knurl diameter needs to be the same. For example, the Kodiak Wheel Bolt - 9/16" Diameter x…

As you mentioned, the integrated brake controllers on your Silverado 3500 trucks will typically not work with electric over hydraulic trailer brakes. The Chevy/GMC factory controllers are simply not compatible with electric over hydraulic brakes and…

I attached a chart that has all of the recommended lug nut torque specs for trailer wheels. Based on your studs being 1/2 inch, your wheels being 15 inches in diameter, and your lug nuts being coned you would want to torque your lug nuts to 90-120 ft…

The Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 item #K2HR35D is a great disc brake conversion kit. It is rated for 3,500 lbs axles, has a 5 on 4 1/2" lug pattern, and is rated for use on 13" wheels. This disc brake kit fits…

The Adapter Module for BrakeRite Electric Over Hydraulic Actuator - OE Ford, GM Brake Controllers Item #DX35FR, is an adapter that will work with the Titan BrakeRite EHB actuating system, the Dexter DX series and the factory GM or Chevy brake…