Kodiak Tires and Wheels K12WB169 Review Video

Based on the dimensions of the wheel stud you sent in a picture of the part #K12WB2 would be what you'd need.

You might be able to use a 225/75-15 tire in place of a 205/75-15 tire. First, the wheels need to be the right size. If the width of the wheel is 6 or 6-1/2 inches where the tire sits then the 225 will fit. To get an accurate measurement the tire…

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

For 7,000 lb Dexter hub assemblies, you could have 1/2 inch or 9/16 inch, or 5/8 inch drive in studs. I've linked the page of our drive in wheel studs for you. Once you have the right stud based on your measurements you can get the correct lug to…

I can help you determine what wheel stud can replace your broken one. I've linked an image of the two styles of wheel studs you could have, Drive in or screw in, along with the dimensions you will need to determine which replacement would be good…

The recommended torque range for lug nuts varies by the stud diameter, wheel size and wheel material and if you refer to the linked chart you can see the torque range for 1/2-inch studs starts at 75-ft-lbs and goes as high as 120-ft-lbs. Many RVs use…

Yes, the Dexter axle part #7359765 that you referenced uses the same 84 spindle that you have measures. This will allow you to reuse your current hubs and bearings.

You actually have vehicle tires on your boat trailer which is not recommended. This is evident by the size starting with the letter P but also because a 195/75-14 size is not a standard trailer tire size. The closest size is the ST205/75R14 like the…

You should be fine as most people do not have trailer wheels and tires balanced, but if you are having a shop mount the tires, and you want to have them balanced, it probably would not cost much more to have the setup balanced as well. One reason…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

Can you please let me know the what the diameter of the knurled part needs to be? You can do this by measuring the lug studs you current have with a digital caliper to the nearest hundredth of an inch.

We have the part #DX98FR which is 1/2 inch longer than the #K12WB2 that you referenced and is same 1/2 inch diameter.