Customers compare STL64RCB to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at the Optronics Thinline LED trailer taillight. This low profile trailer taillight serves three functions on trailers over 80 inches wide. It provides your stop light, your taillight, and your turn signal light. Now this is the thinline series from Optronics so it has a low profile design so that way the light can easily fit into tighter spaces. It's… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The LED Trailer Tail Light #DG52720PB is only offered as an assembly. They do not offer the mounting bracket separately without the lights.
view full answer...Since your trailer wiring has separate turn signals from the stop lights you'd need to wire up the part #DG52720PB so that one of the panels gets the stop light for the brighter illumination and the other gets the blinker circuit. The black wire…
view full answer...The Optronics license plate bracket part #LP10SB would work great with the taillights part #CE44VR and on your Coyote Lite trailer. It's made from polymer which allows it to be rust proof and one less thing to worry about.
view full answer...Both the Optronics lights you referenced, parts #STL59RCB and #STL59RB, are thin-line 9-diode LED light strips that directly surface mount without need for a mounting bracket or bezel. Each light has two mounting holes built in to the housing; these…
view full answer...The latch that you have on your current StepAbove could need to be adjusted so that it secures it tighter to your doorway. I attached a picture that I took from the instructions that shows how to make the adjustment. Try that and the movement should…
view full answer...The closest taillight solution we have to what you are looking for would be the part #STL264RCB which is a stop/turn/tail light that is an LED strip that measures 20-1/2 inches in length.
view full answer...The Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 11 Diodes - Clear Lens #STL69RCB is a single light. If you needed two of these lights you would have to order a quantity of two.
view full answer...The legs for the CargoSmart Folding Workbench Brackets #3481744 will sit 22-21/2" away from the wall when in the deployed position, and then the brackets are 2-1/2" tall so they will stick out that far from the wall. My contact at…
view full answer...That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
view full answer...The ThinLine LED Trailer Tail Light part #STL64RCB when used as an identification light at the top of a trailer over 80" wide will only need to serve one function which is to act as a marker/clearance light. Therefore, there will only be two…
view full answer...Just like the tires for your trailer, the combined load capacity of your wheels should at least match the loaded weight of your trailer. Ideally though they will have a larger combined capacity than your trailer weight to provide a nice safety…
view full answer...The Access TonnoSport Soft Roll-Up Tonneau Cover #A22010319 that you referenced is a confirmed fit on your 2004 Ford F-250 with the 6-3/4-foot bed. Thank you for your photo showing it installed. Since this cover installs inside the truck's bed…
view full answer...