License Plate Bracket to Use with Triple LED Trailer Tail Light # CE44VR

Question

Question:

Im interested in buying 2 tail lights. Your model number CE44VR. I would also need a surface mount licence plate light to sit right below the left tail light. Which of your licence plate lights would be the best fit. For the rear of a Coyote Lite trailer.

asked by: Donald P

0

Expert Reply:

The Optronics license plate bracket part # LP10SB would work great with the taillights part # CE44VR and on your Coyote Lite trailer. It's made from polymer which allows it to be rust proof and one less thing to worry about.

expert reply by: Jameson C

0

Answer 1

The ThinLine LED Trailer Tail Light part #STL64RCB when used as an identification light at the top of a trailer over 80" wide will only need to serve one function which is to act as a marker/clearance light. Therefore, there will only be two…

view full answer...

Answer 2

The LED Trailer Tail Light w/ Reflector #DG52720PB comes as just one tail light so you would need 1 for each side of your trailer.

view full answer...

Answer 3

Since you are keeping your current taillights on your Grand Design 303RLS I recommend the ThinLine LED Trailer Tail Light #STL64RCB over the #STL64RB as they have a clear lens. When you use these during the day there will be a more pronounced…

view full answer...

Answer 4

The Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs part #AKEBRK-35 may be the assemblies you need based off the weight capacity of 3,500 lbs. To be sure you want to make sure your existing assemblies are 10"…

view full answer...

Answer 5

I've linked to a diagram showing the dimensions of the Command #CE44VR trailer lamp. We don't have a video completed as of yet, but when we do, it'll appear on the website.

view full answer...

Answer 6

The Triple LED Trailer Tail Light part #CE44VR is a pretty common OEM taillight used on motorhomes so as long as the style is the same as the one you have and the dimensions of 14" long x 6-7/8" tall x 1" deep are the same it should…

view full answer...

Answer 7

Yes, it will and hello! The Triple LED Trailer Tail Light item #CE44VR is the direct replacement for the older Command 003-30. It's got the upgrade LED's along with a better seal.

view full answer...

Answer 8

We have had other customers in the past replace their Winnebago lights with the #CE44VR. However, I'm unable to cross-reference that part number to be able to make a direct comparison. The only information I could find is that the 183787-01-CHT…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 11

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...