Review of Gen-Y Hitch Reducer Sleeve - GY22YR Video

The Yakima StageTwo Bike Rack #Y47VR won't secure properly to the adapter you're talking about. It's a great rack and I love the anti-rattle system, but the anti-rattle is built to essentially brace itself inside the receiver and then…

Hey Bernard, the hitch ball that comes with the Equal-i-zer #EQ37140ET does not come pre-installed onto the head of the system.

The SportRack Cargo Carrier for 2" Hitches #SR9851 has a shipping weight of 67-lbs. This figure includes the packaging so the actual net weight of the cargo carrier itself is approximately 63-lbs. The 2-inch Class III hitch receivers we offer…

Most WD shanks that fit a 2-1/2" receiver taper down to the normal 2" receiver size, just like the Equal-i-zer Shank #EQ90-02-4700. The only thing that you need to be sure of is that the mounting holes are in the same space. I have linked a…

On the Brophy Hitch Adapter #HR26 the distance between the two hitch pin holes is 7-inches, from hole center to hole center. Overall length end to end is 12-inches. Please note that using this extension will reduce your hitch's weight capacity by…

The procedure for lubricating the hitch head is pretty simple. Place a pea-sized dollop of multi-purpose or bearing grease on the underside of the ball platform right next to the sockets. You'll also want to do the same thing on the under side of…

You have a couple of options. The best thing to do would be to use a ball mount that fits in your hitch. The reason is that you will not have to worry about a reducer sleeve fitting, any capacity reduction, or adding another component in the system.…

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

There is a sleeve that will work with a Reese weight distribution system, the Curt Reducer Sleeve 2-1/2" to 2" #C45405. I've attached a couple review videos of this product for you to take a look at as well.

Extending out the safety chains is definitely something that has to be done with the Swagman Original 4 Bike Towing Rack #S64675. The RoadMaster 8" Safety Cable Extensions #RM-910648-8 will help get the job done but I do recommend picking up…

If one of the air spring brackets from the Firestone air spring system is bent on your Ford F-150, I definitely recommend replacing the bracket in question. They should not bend or lean as you mentioned your local dealer describing. If you have the…

An offset stake pocket on your 2021 Ford F-150 has a stake pocket that is biased slightly forward or rearward, not centered. On your vehicle, only the front and middle stake pockets would be offset on your 2021 Ford F-150. If your tie-down anchors…