Curt Hitch Receiver Reducer Sleeve Review C45408 Video

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV works better with a weight distribution system. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily designed for minor…

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

Hey Bernard, the hitch ball that comes with the Equal-i-zer #EQ37140ET does not come pre-installed onto the head of the system.

For your Super Titan 3000 Weld-On Trailer Hitch with 3" Receiver #38023 I recommend using the Curt Hitch Receiver Reducer Sleeves #C45408. These sleeves can both be used at the same time to reduce your 3" receiver to a 2"…

The SportRack Cargo Carrier for 2" Hitches #SR9851 has a shipping weight of 67-lbs. This figure includes the packaging so the actual net weight of the cargo carrier itself is approximately 63-lbs. The 2-inch Class III hitch receivers we offer…

The 18 inch long Equal-i-zer weight distribution shank part #EQ90-02-4600 does give most trucks and trailers the ability to tow with the tailgate down like it sounds like you are planning on doing and like what you see in the attached picture. Now…

We have what you need. It is the Curt Reducer Sleeve #C45408. This adapter reduces a 3 inch hitch receiver to a 2-1/2 or 2 inch receiver opening. I've linked a video for you.

The Jayco Jayflight 2005 28FKS has a dry tongue weight of 1135 lbs. That is a lot for a 3/4 ton truck and will have you close to the payload. With the air bags you will be able to get rid of the sag in the suspension but I would certainly want sway…

The Replacement Square End Cap #853-5826 should work perfectly for you. I went out and measured one and found that it's overall diameter is 2 inch by 2 inch and the inner tube piece measures a tiny bit over 1.75 inches by 1.75 inches so it would…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The B and W Companion hitch part #BWRVK3300 will work great for you. The head of the hitch does pivot a decent amount side to side to help mainly with connecting and disconnecting on ground that isn't perfectly level but it will help with…

The Curt Sway Control System #C94VV will be adaptable to a 12 way system and then back again if you use the 7-way like #30717 and #H20046 . Then to combine the turn and brake functions prior to the unit use the Roadmaster Brite-Lite Wiring Converter…