Review of Dexter Axle Replacement Electric-Over-Hydraulic Actuator for BrakeRite II - DX36XR Video

Check out the picture I attached that shows the electrical connections that the Titan BrakeRite #T4813100 will make. I also attached installation instructions for this product for you to check out. The updated version of the Titan BrakRite is the…

I find the Hydrastar Vented Marine Electric Over Hydraulic Actuator #HBA16 is a more reliable system than the Dexter BrakeRite Actuator #DX36XR. We have it available as a Plug and Play Kit #HS481-8067 much like the Dexter BrakeRite #T4813102 you…

Yes, the Replacement Plug and Play Electric-Over-Hydraulic Actuator #DX36XR is the correct part for your Dexter BrakeRite II SD. To replace the wiring harness you also need part #T4834300. This is the harness with the 7-Way connectors and the…

Yes, the Titan BrakeRite does get plumbed into the hydraulic brake lines of the trailer it gets installed onto. Check out the picture I attached that shows this. I attached a copy of the instructions for you to check out also.

It sounds like the motor is running but not building pressure. This could indicate a leak somewhere since you have a full reservoir. The next thing you can do is bleed the brakes to ensure the system is free of air in the lines. I have included a…

It sounds like the problem you are having is related to one of the possibilities you have mentioned. It is nearly impossible to press a race in straight at home unless you have the proper equipment and have done it before. Taking the drums to a brake…

In order to remove the hub/drum on your trailer you will want to first remove the spindle nut. Once the spindle nut is removed you are going to want to take a hammer and tap the outer portion of the drum as well as the hub face a few times to break…

I went out into our warehouse to get the mounting pattern dimensions of the module of the Brake Rite part #T4813102. From left to right they are all 6-3/4 inches apart. From the top holes to the bottom holes they measure 2-3/8 inches apart. From the…

The actuator by itself is not available as a replacement part for the Titan BrakeRite Plug and Play Electric-Hydraulic Actuator Kit #T4813102, you would need to get the full kit if your actuator died on you.

The real difference between the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit #T4813102 and the Titan BrakeRite II is with the control module. The BrakeRite II has it as a sperate, self-contained control module instead of including…

The Replacement Remote Mounted SD Control Module for BrakeRite II T4834200 was discontinued a little over a year ago back at the start of 2021. So while it might be the correct replacement for your system, it isn't readily available on the market…

I have attached the wiring diagram for the Titan BrakeRite EHB Electric-Hydraulic Actuator #T4822500 that you referenced. This particular actuator is designed for use with hydraulic drum brakes and features 1,000 psi of hydraulic pressure. I have…