Replacement Dexter BrakeRite II SD Electric Over Hydraulic Actuator - Vented - 1,500 psi

Dexter Accessories and Parts - DX36XR

This plug and play pump replaces the electric-over-hydraulic brake actuator and Severe Duty control module for your Dexter BrakeRite II SD. The 3 plugs allow you to connect your battery cable, breakaway switch, and harness directly to the pump.

Features:

• Plug and play pump replaces the electric-over-hydraulic brake actuator and Severe Duty control module for your Dexter BrakeRite II Severe Duty (K68-002-00)
  • Internal control board eliminates the need for a separate SD control module
  • 3 Plugs allow you to connect your battery cable, breakaway switch, and wiring harness directly to the pump
  • 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller
• Resists weather with durable, plastic housing
• Wiring harness (T4834300) sold separately
• DOT compliant

Specs:

• Application: disc brakes
  • Compatible with drum brakes when used with reducer (T4844100 - sold separately)
• Maximum output pressure: 1,500 psi
• Response time:
  • Reaches 200 psi in 0.3 seconds
  • Reaches 1,350 psi in 1.1 seconds
• Overall dimensions: 6" long x 7-1/4" wide x 9-1/8" tall
• Mounting hole dimensions:
  • Set of 4 on bottom: 1/4"-20 UNC x 5/8" deep
  • Set of 3 on back: 5/16"-18 UNC x 5/8" deep
• 2-Year warranty

Notes:

• Dexter's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
• Ford and GM trucks with factory brake controller require adapter (sold separately).

K68-001-02 Replacement Plug and Play Electric Over Hydraulic Brake Actuator and SD Control Module for Dexter Brake Right 2 Severe Duty

Replaces K68-002-00 Plug and Play Electric Over Hydraulic Brake Actuator and SD Control Module for Titan Brake Right 2 Severe Duty

Alt 4813102

Installation Details