Curt Wiring 55151 Review Video

You will be able to use the Curt Converter #C56496 on your 2019 Volkswagen Jetta. This will allow you to splice into the tail light wiring on your Jetta for a 4-way flat connector. The 4-way will allow you to use a Light Kit #20174 on a Cargo Carrier…

According to our friends at Yakima, their EvenKeel will work with crossbars measuring up to 3-5/8 inches wide and 1-1/2 inches tall, so it'll work fine on the 1-1/4 inch square crossbars used on the Malone #MAL53FR EcoLight trailer you'd…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 will fit your 2022 Mazda CX-5 with the new rear bumper. This is confirmed to fit all models of the 2022 CX-5 with the exception of the diesel. This is a custom-fit Class III hitch with a…

Yes, the EcoHitch Hidden Trailer Hitch Receiver part #306-X7311 is a confirmed fit for a 2017 Volkswagen Jetta. In fact, I have a photo from the manufacturer on a GLI which is attached below.

The EcoHitch #306-X7311 fits the standard 2014 Volkswagen Jetta as well as your TDI model so you're good to go! Attached is an installation video of this hitch on a 2016 Jetta for you to check out.

The Curt Upgraded Circuit Protected Powered Tail Light Converter - 4-Pole Flat Trailer Connector part #C56496 only draws power from the vehicle while a trailer is attached and the lights are activated. Therefore, you don't have to worry about it…

Only the battery should be used when installing any type of powered trailer wiring harness. Part of the reason is that it is not tested in any other way. A connection to the battery is reliable but going through some other circuit could lean to…

Depending on the size and weight of your kayaks a Trailer #MAL93FR is going to make the most sense for carrying 2 kayaks. The Viking Solutions Stack Rack #310-VSR201 would be difficult to carry kayaks with since the kayaks are going to be wider than…

Yes, the Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101 could be installed on the tongue of the Malone EcoLight Trailer part #MAL53FR in place of the union plate that joins the two pieces of the tongue together which is pictured below. I spoke…

The Malone EcoLight Trailer #MAL53FR referenced in your question actually does have a payload capacity of 400 pounds. I verified this with Malone. From time to time parts get updated/upgraded so we appreciate you making us aware of this! The trailer…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 has been confirmed to fit your 2022 Mazda CX-5. I have linked an installation video below that will show you the installation process as we have installed this receiver on a 2022 in our shop.…

The Curt Upgraded Circuit Protected Powered Tail Light Converter #C56496 along with the Powered Converter Wiring Kit #55151 are what you need to add wiring to your 2022 Mazda CX-5. Sometimes our fit system needs adjustments made and this is one of…