Curt Trailer Hitch Installation - 2022 Mazda CX-5 Video

I looked up pictures of the coupler setup of your trailer and it would not be compatible with a weight distribution system since it basically uses a pole tongue and has a pipe that runs on top of the pole tongue as well. What you can do to fight sway…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

According to our friends at Yakima, their EvenKeel will work with crossbars measuring up to 3-5/8 inches wide and 1-1/2 inches tall, so it'll work fine on the 1-1/4 inch square crossbars used on the Malone #MAL53FR EcoLight trailer you'd…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 will fit your 2022 Mazda CX-5 with the new rear bumper. This is confirmed to fit all models of the 2022 CX-5 with the exception of the diesel. This is a custom-fit Class III hitch with a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Depending on the size and weight of your kayaks a Trailer #MAL93FR is going to make the most sense for carrying 2 kayaks. The Viking Solutions Stack Rack #310-VSR201 would be difficult to carry kayaks with since the kayaks are going to be wider than…

The Malone EcoLight Trailer #MAL53FR referenced in your question actually does have a payload capacity of 400 pounds. I verified this with Malone. From time to time parts get updated/upgraded so we appreciate you making us aware of this! The trailer…

Yes, the Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101 could be installed on the tongue of the Malone EcoLight Trailer part #MAL53FR in place of the union plate that joins the two pieces of the tongue together which is pictured below. I spoke…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 has been confirmed to fit your 2022 Mazda CX-5. I have linked an installation video below that will show you the installation process as we have installed this receiver on a 2022 in our shop.…

To add a hitch to your 2023 Mazda CX-5, I recommend the etrailer Hitch item #e98902. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Mazda with included hardware. I really like this hitch because the crosstube…

According to my research the only difference between a 2022 Mazda CX-5 and a 2023 Mazda CX-5 is that they offered an additional paint job for the new model year, meaning anything that is confirmed to fit a 2022 should fit a 2023 without any issues.…