Curt Powered Converter Wiring Kit - 15 Amp

See what our Experts say about this CURT Accessories and Parts

• Recommendation on a Trailer Hitch for Either a 2017 Infiniti QX30 or a 2017 Mercedes-Benz E-300
  The Curt Trailer Hitch # C11454 is a custom-fit hitch that fits the 2017 Mercedes-Benz E-Class. This Curt hitch is a Class I hitch with an 1-1/4 receiver opening. The gross tongue weight is rated at 200 lbs and the gross towing weight is rated at 2000 lbs, but you will want to check the owner's manual or with a local Mercedes-Benz dealer for this vehicle's weight capacity. If the vehicle has a lower tongue weight capacity, then you will want to abide by that capacity You will also need...
  view full answer...
• Correct Size Fuse for Curt T-Connector Vehicle Wiring Harness On 2018 - 2020 VW Golf GTI
  The Curt T-Connector Vehicle Wiring Harness part # C56405 which is a fit for a 2018 - 2020 Volkswagen Golf GTI uses a 15 amp fuse. Please keep in mind we do offer the Curt Powered Converter Wiring Kit part # C55152 which is a replacement power line kit that has the fuse you need.
  view full answer...
• Recommended Trailer Wiring Harness for 2011 Mercedes-Benz E350
  The Curt Powered Converter Wiring Kit # C55152 that you referenced consists of just the wiring that allows you to run wire from a converter to the vehicle's battery. The Curt Powered Tail Light Converter # C59236 you also referenced, which is confirmed to fit your 2011 Mercedes-Benz E350, is the complete kit that includes the above-mentioned wiring, the 4-Way harness, and the converter box itself. For your vehicle you will need the Curt # C59236. Based on my research your 2011 Mercedes...
  view full answer...
• Parts Needed to Connect Battery Bank to Inside Lights on Snowmobile Trailer
  For your application I recommend using an in-line fuse holder like the 10 Amp Kit # 55151 or the 15 Amp Kit # C55152. These some with butt connectors and a lead wire to run for power so you get everything in a kit. A circuit breaker, like the 20 Amp # PK54520, is rated for higher things like a trickle charge from your tow vehicle battery to the trailer battery bank which is why I recommend the fuse instead of the circuit breaker. Aside from the fuse you'll need a switch like the Single...
  view full answer...
• Older Pickup Will Not Power The Travel Trailers Lights
  If your vehicle operates on a 3-wire system, meaning there are separate brake and turn signals, then those signals will need to be combined to operate on 1 wire to properly activate your trailer's tail lights. The Curt Tail Light Converter with 4-Pole Flat Trailer Connector, # C56236 will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. You will need to use this with the Curt Powered Converter Wiring Kit, # C55152.
  view full answer...
• Can Curt Trailer Wiring C56236 Install in Vehicle with LED Taillights
  The Curt wiring harness part # C56236 can be used on a vehicle with LED taillights because it draws all of the amperage needed for illuminating the trailer lights from the vehicle battery. You need to use the power kit part # C55152 to make the connection to the vehicle battery. Basically it just uses the taillight circuits as signal wires and draws all the amperage from the battery.
  view full answer...

Do you have a question about this Accessories and Part?