Curt Powered Tail Light Converter Installation - 2014 Volkswagen Jetta SportWagen Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I checked with Curt to confirm the wiring harness specified for your 2012 Audi Q5 and it is indeed the Curt #C59236. I also spoke to my technical contact at Curt and he confirmed compatibility with your 2012 Q5. This harness provides isolation and…

For your 2013 Chevy Spark we only have Class I hitches available like the Curt #C11334 since it's a lighter duty vehicle. Higher hitch Classes are only available on heavier duty vehicles like SUVs. But we do have a Class I compatible e-bike rack…

TorkLift's EcoHitch #306-X7284 that fits your 2012 Jetta Sportwagen TDI will require fascia trimming as part of its overall installation. Please refer to the linked photo taken from the written instructions that will ship with the hitch. This…

Yes, the EcoHitch part #306-X7284 is a confirmed fit for the 2014 Volkswagen Jetta Sportwagon turbo diesel.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

I attached a picture that shows a wiring diagram for the Curt trailer wiring harness part #C59236. I also attached the install instructions below that detail how to install it on varying styles of vehicles. Based on what you are describing it sounds…

The EcoHitch #306-X7311 fits the standard 2014 Volkswagen Jetta as well as your TDI model so you're good to go! Attached is an installation video of this hitch on a 2016 Jetta for you to check out.

The Curt Upgraded Circuit Protected Powered Tail Light Converter - 4-Pole Flat Trailer Connector part #C56496 only draws power from the vehicle while a trailer is attached and the lights are activated. Therefore, you don't have to worry about it…

The Curt Trailer Hitch Receiver #C11474 referenced in your question is confirmed to fit your 2013 VW Jetta SportWagen TDI diesel model. I actually called my contact at Draw-Tite to verify this. This Class I hitch is custom fit for the vehicle, which…

Yes, we do have a hitch and wiring harness available for the 2023 Kia Telluride. The etrailer Hitch item #e45ZR is confirmed to fit the 2023 model. It is custom fit and bolts directly to your Telluride with included hardware. This is a class III…

The Curt hitch part #C11474 that you referenced actually replaced the part number 11072 that you mentioned, but it will not fit the TDI version of the SportWagen. That said the only hitch we have confirmed as a fit for the TDI model of a 2014…