Convert-A-Ball Hitch Ball - Trailer Hitch Ball - 900B Review Video

The distance between the tangs on Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle #AMCC2 is 2 inches. I've attached a link to a video review of this product for you to take a look at.

The distance between the mounting holes of the #RTB1 is 2 inches. The diameter is 5/8 inch.

I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part #336VS503505 and they were not quite sure what measurements you are looking for nor was I. That said, I went out to our warehouse for you and jotted down a few…

The total length of the shank on the Convert a Ball Interchangeable Ball part #105TB is 3-1/2 inches and the threaded portion is 3 inches so the unthreaded portion is 1-1/4 inch at the base of the flange and then 1/2 inch below the threads.

According to the review video we have of the Brophy #RTB1 ball platform those holes used to vertically adjust this piece are 2" apart on center. It kind of sounds like you have a shank for a weight distribution system as the 1-1/4" height…

We do have what you're looking for. If you already have a ball mount, the Convert-A-Ball Interchangeable Ball Set - 1-7/8" and 2" Balls #901b will work great. This part will easily and quickly allow you to swap from 1-7/8" to a…

The distance between the bolt holes for the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount #C45802 is 2-5/8" on center. Since that same measurement for the MaxxTow Adjustable-Height Ball Mount MT70067 is 1-1/2" on…

Yes the etrailer Trailer Wheel Lock #288-02020 that you referenced would fit a trailer tire size of 175/80-13.

They are made in China. Dexstars are made in USA if that's what you are looking for.

Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part #76031 installed. However, in order to activate this feature you will need to place your foot on…

Convert-A-Ball doesn't offer their Interchangeable Trailer Ball Sets with a 1-1/4 Inch diameter. If you're wanting to use a ball mount with a 1-1/4 inch hole for the trailer ball, you could use a Hitch Ball Bushing like #58184, which would…

Kenda is the name of the tire manufacturer, and Loadstar is the name of the model or tread design of the particular tire. If you click on the second thumbnail photo under the photo on the product description page, and scroll your cursor over it, you…