Review of Convert-A-Ball Hitch Ball - 005B Video

Most of the powered trailer jacks we offer are designed to mount in the center of the a-frame which is inaccessible, as shown in the photo you provided (thanks for the photo, by the way!) The Fulton #F141401 would be the exception. The jack has a…

The Air Lift AirLift 1000 Air Helper Springs for Coil Springs will work in the exact manner you want; improving the ride and how your 2014 Ram 1500 handles when you are towing. These air springs will reduce the strain on your Ram's suspension and…

The Curt ball mount part #C74WR weighs 4 lbs. There isn't an aluminum ball mount option that has a sway bar bracket. The closest option we have that has the sway control tab is the Curt #D320 which is steel. It weighs 7 lbs.

You can see all fixed 2-inch ball mounts by clicking on the linked page. The shortest of these is the Curt Ball Mount #C74WR. This aluminum ball mount measures 8-1/2-inches from the center of the hitch pin hole to the center of the ball hole. It…

Convert-A-Ball doesn't offer their Interchangeable Trailer Ball Sets with a 1-1/4 Inch diameter. If you're wanting to use a ball mount with a 1-1/4 inch hole for the trailer ball, you could use a Hitch Ball Bushing like #58184, which would…

The HitchMate Boat Trailer Step #HE4036 does only come as powder coated steel. This will offer corrosion resistance, but it will also need to be kept clean to keep this up. We do have a galvanized step available, but it is a different design. The…

The video may not cover it, but one of the pictures shows what you are looking for. From the center of the hitch pin hole to the nearest part of that gusset is 4 inches on ball mount #AMSC6.

You would want to mount the Convert-A-Ball Pintle Hook Combo #PH1 to a mount such as #AMPC3 both of which use 1/2 inch bolts.

The hardware that comes with the Curt hitch part #C11030 that you referenced is Grade 5 which means it is zinc coated to fight corrosion. Zinc coating isn't quite as corrosion resistant as stainless steel but it does a good job preventing rust.…

The replacement pintle sleeve #PS has an outer diameter just under 1-7/8 inches.

The Replacement Pintle Sleeve for Convert-A-Ball Pintle Hook Combos #PS measures 3-3/16 inches tall. I have attached a diagram showing this measurement for you.

There is indeed a wishbone harness included with the #TLL9RK Light Kit. The running light circuit is split into two separate circuits, one for each side of the trailer. I just got done installing this exact kit on my PWC trailer about a month ago. It…