Curt Pintle Hook for 2 inch Hitches Review Video

The Demco Lunette Ring #DM09557-81 is approximately 3" wide and the holes are 1" apart center on center. This lunette ring fits in channel mounts like the Demco 6-Hole Adjustable Channel Bracket #DM59602.

For the applications that we normally deal with we don't have a trailer hitch that has a 5,000 lb tongue weight capacity. The Pintle Hook part #C48004 does have a 5,000 lb tongue weight capacity though so if you have a heavy duty vehicle that…

We do have a pintle hook that fits in a 2" hitch and will work with a lunette ring that has an inner diameter of more than 2-1/2", the Curt #C48004. I asked some colleagues and we weren't quite sure what you were referring…

The Buyers Products 15 Ton Pintle Hook part #337PH15 does have the 30,000 lb. GTW and the 6,000 lb VLL ratings you are requiring. If you want the same capacities but with a 2 6/16" ball then the Convert-A-Ball Pintle Hook Combo with 3…

The Pro Series Adjustable Pintle Hook Mounting Plate for 2" Hitches - 14K lbs #63072 has a measurement from the front of the mounting plate to the center of the hitch pin hole of 9-11/16 inches. It sounds like you are wanting to know the backing…

Usually loops for the safety chains are on the hitch receiver because a pintle hitch like the Buyer's Products #33710045 you referenecd often connects to a mount the B&W #BWPMHD14003 which slides into a receiver. If this isn't how yours…

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

Because the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR are only meant to stabilize the trailer and not actually lift it they do not have an actual weight capacity. You would only extend the jack until it's touching the ground and then stop…

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

Yes, the Curt Bolt-On Pintle Hook, Item #C48210, will work with a 3-inch lunette ring on a 10-ton trailer. It has a maximum weight capacity of 20,000-lbs and a maximum tongue weight capacity of 4,000-lbs. The mounting hardware is included, and it can…

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

The fully extended height of the Ark Drop Down Corner RV Stabilizer Jacks #AR34FR is 24". The fully retracted height is 16".