Review of Patriot Hitches Hitch - Adjustable Height - PH67SR Video

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot Hitches we have their Captain #PH34FR. We do have the Gen-Y Shank #325-GH-304 rated for…

I have the perfect solution for you! The Patriot Hitches Adjustable Drop Hitch #PH67SR will be exactly what you need. This will fit your 2" receiver and can be adjusted to rise or drop 2-1/2" up to 11". This is going to be your best…

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR will not reduce the capacity for your 2021 Promaster City with a class III receiver.

The thickness of the wall of the 7,000 lb-rated Patriot Hitches Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop #PH67SR is 3/16".

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

That's a cool Jeep and the correct adapter for your 2015 Jeep Wrangler Unlimited with a Poison Spyder front bumper are the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick #RM-035, which we know to…

The dimensions of the bumper mount adapters for Jeep Wranglers #RM-035-1 which is 1 inch and #RM-035 which is 3/4 inch is referring to the thickness of the shackle mounts. They have adapter pins which allow them to fit 1 inch and 7/8 inch diameter…

I attached an FAQ for you to check out that details all of this, but what you need to do is get your truck and your trailer on level ground and take a couple measurements. You will need to measure from the ground to the bottom of the coupler on the…

You can certainly use a weight distribution system on your lifted truck. The key will be to find a weight distribution shank that offers you enough drop to be able to tow your trailer level. Weight distribution systems are available without a shank…

The tongue weight capacity of the Curt weight distribution shank part #C17132 that you referenced is 1,500 lbs. I believe that is your only question but if you have any other parts from your WD system that needs to be replaced let me know and…

It sounds like you're trying to mount a bike rack on your Gen-Y Ball Mount using a hitch adapter on the top receiver with enough clearance to not interfere with your trailer's jack. I'm not going to tell you that you can't do this…

With the large collar on the end of your receiver for your Subaru Ascent it does not appear you will be able to use the Blue Ox Hitch Receiver Immobilizer II #BX88224. Instead you can use the Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY39FR with the…