B and W Tow and Stow 3-Ball Mount Review - 2020 Toyota Tundra Video

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and…

The B&W Tow & Stow 3-Ball Mount part #BWTS30048B is designed for a 3" receiver tube opening therefore if this is what you have on your 2006 Ford F-250 then yes, it will work for you. However, if I had to guess I would say…

For the price it's pretty hard to beat the B&W Tow & Stow 3-Ball Mount #BWTS10048B. It has all of the ball sizes you are going to ever need and it has height flexibility which means that you can basically tow most trailers level. 5 inches…

The distance from the top of the shank to the bottom of the platform on the B&W Tow & Stow 3-Ball Mount part #BWTS10048B while in the stowed position is 8-1/2". I am not sure where you were measuring from but if you measure from the top…

The ball measures 2-3/4 inches from the ball mount surface to the top of the ball. I am glad to see that you are making sure you get the proper ball mount for your tow set up. The rule of thumb is to be no more than 2 inches over or under. The…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I went to the warehouse to take some measurements and found that from the top of the receiver to the bottom of the 2-5/16" hitch ball was approximately 10-1/2" for the B&W Tow & Stow 3-Ball Mount with 5" of drop #BWTS10048B…

The B&W Tow & Stow 3-Ball Mount part #BWTS10048B has a distance from the center of the hitch pin hole to the back edge of the vertical upright of 3" and 4-1/8" respectively. I have attached a photo below to assist.

Yes, all pins on the B&W Tow & Stow 3-Ball Mount part #BWTS10048B must be used for operation. If you're looking for security, there is a kit designed for this ball mount that comes with matching locks for all four total pins, the…

For your standard height trucks and trailers, the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black #BWTS10048B will work very well for both of your trucks. This will not only work well with all 5 of…

Because of the large span required to secure the ball mount of the B&W Tow and Stow 3-Ball Mount #BWTS10048B, the Master Lock Trailer Hitch Receiver Lock #1480DAT will not work to secure the ball mount to the shank. The span of the #1480DAT hitch…

The actual height of a vehicle's hitch will depend on several things including the age and condition of the suspension, the wheel/tire size, the condition of the tires (are they new or do they have 40K miles on them) as well as the passenger and…