Convert-A-Ball Ball Mounts - Fixed Ball Mount - AMSC6HD Review Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

On the Convert-a-Ball cushioned ball mount #AMSV10 from the center of the hitch pin hole to were the nearest part of the drop is approximately 4-1/4 inches. This amount can very slightly depending on the welds. I have edited your picture to show…

The pilot diameter of the Dexstar trailer wheel part #DEX54FR that you referenced is 3.19 inch so for a center cap to fit that the #319EZ would be perfect.

It really doesn't hurt to have a ball mount with more capacity than needed. If anything it's just added insurance that the ball mount wouldn't fail. For 14k capacity cushioned ball mounts we have the part #AMSC2HD which has a 2 inch drop,…

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…

The Curt RockerBalls #C82KR are not to be used with sway control. The 2 systems will fight against each other as you are driving. They also will not fit the Curt Forged Ball Mounts #C45341. They require the 2-1/2" wide ball mount for the…

I have a solution for achieving the height of the 2-5/16" Hitch Ball w/ 2" Rise - 1-1/4" Diameter x 2-5/8" Long Shank - Raw - 25K item #C40087 you were looking at but there aren't any high rise 2-5/16" hitch balls with a…

The size wrench or socket for the nut of Curt Rockerballs like the #C82KR is 1-1/2 inch which we offer with the part #C20001. Curt recommends 250 ft lbs of torque.

The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…

The Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount part #CAB-UM is indeed an excellent option that will help improve the overall towing experience by decreasing the felt road shock in the tow vehicle. The Convert-A-Ball in particular as you…

Weight capacities are designed to tell you how much weight it can be used with and have it still be totally safe. The Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount #CAB-UM has a 5,000 lb weight capacity. If you are absolutely sure you'll…