B and W Pintle Hitch - Pintle Mounting Plate - BWPMHD14004 Review Video

Hey Marc, I contacted Buyers Products was able to get that measurement for you, and the distance is 2-3/4 inches from the center of the hitch pin to the gusset on the Buyers Products 2" Pintle Hook Mount #337PM812. For a compatible pintle hook…

The first thing you will want to check is the output voltage on the brake controller. If it is set too low, it will not send enough power back to engage the trailer brakes. For testing purposes, it is easiest to set it to full power. Using a meter or…

If you have a 2 inch receiver opening on the vehicle you will be towing with the B&W Pintle Hook Mounting Plate, part #BWPMHD14005 may work well for you. The mounting plate features 7 holes on each side of the plate that are spaced 1-3/4 inches…

Other than the Tow Bar, you would need the wiring so that the lights on your Wrangler would work in tandem with the lights on the tow vehicle, and the vehicle-specific base plates that would attach to the Wrangler. The base plates provide an…

I do have an option but the Roadmaster StowMaster Tow Bar part #RM-581 can not be used with a Blue Ox Base Plate Kit. The adapters are only available for motorhome mounted tow bars not vehicle mounted tow bars. The Blue Ox Allure Tow Bar part…

You are going to have to either change the hitch on the tow vehicle or use a different tow bar. For Roadmaster base plates on the vehicle you can use the Stowmaster tow bar with a lunette ring, #RM-581. Roadmaster does not offer an alternate lunette…

Yes, the Roadmaster StowMaster Tow Bar part #RM-581 is compatible with any of the Roadmaster Crossbar-Style Base Plate Kits like part #425-1 which is for the 92-96 Ford F-150 and 92-93 Bronco.

I checked the Featherlite Trailer website for specs on the model 3116 trailer but this part number returned no results. But if your trailer uses an industry-standard 50-degree a-frame design then the Demco A-Frame Trailer Coupler #DM16680-52 will fit…

I walked out to our warehouse and pulled the Redline A-Frame Trailer Coupler #CA5100B. At the widest point inside the coupler measured approximately 9-1/4 inches, the narrowest approximately 2 inches and 8 inches between those points. Check out the…

Yes the Curt Pintle Hook #C48215 will bolt up perfectly to the B&W Pintle Hook Mounting Plate for 2" Hitches #BWPMHD14005 you were looking at. This will give you 6 different positions to mount the pintle hook so you can make sure your…

According to Yakima, the maximum distance between the towers for the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5868 will depend on the bed size of your 2014 Toyota Tacoma Double Cab with the Deck Rail System.…

On the Convert-a-Ball cushioned ball mount #AMSV10 from the center of the hitch pin hole to were the nearest part of the drop is approximately 4-1/4 inches. This amount can very slightly depending on the welds. I have edited your picture to show…