Review of CE Smith Boat Trailer Parts - Guide Post Extensions - CES77FR Video

I am not aware of any Titan Surge Brake Actuators having an available manual lockout for them. It is possible to convert some of the Titan Zinc-Plated Brake Actuator #T2477600 to an electric lockout. To do this you will need the Solenoid Valve for…

I spoke to my contact at Titan and he informed me that there really isn't a simple way to lock out the sliding portion of the Model 10 actuators. You would have to either weld the two portions of the actuator together or drill holes through them…

The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…

The CE Smith bunk boards, part #CE27845, are made from untreated southern yellow pine 2 x 4's. The carpeting is a marine-grade, weather resistant carpet.

The longest bunk boards we offer pre-wrapped are the CE Smith Carpeted Bunk Boards for Boat Trailers part #CE27845 which measure 7' long. For longer boats, you'd simply install multiple bunk boards on the same side until you have the desired…

If you are needing 10' lengths then you may be better off using 2 of the 5' long boards, part #CE27820. The longest bunk boards that we have are found as part #CE27845 and are 7' long so 2 of the 5' boards is the best solution.

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

The psi should be listed on the sidewall of the tire. It is recommended that tires always be inflated to the max psi. The max psi of the tire will depend on the tire's load range, not the weight of the trailer. For instance, we carry 5.30-12…

If you wish to attach all of your lights to one dedicated ground wire that will work fine for you. Please be aware that modifying the mount in any manner will void the warranty for the light. The #MCL67AB light is designed to be grounded through the…

When a single function light only has 1 wire, like the Thinline LED Trailer Clearance or Side Marker Light #MCL67AB, it means that it grounds through the mounting hardware. If the mounting location doesn't have a clean, bare-metal surface then…

Your old trailer lights like #MCL67AB are grounded to the trailer via their mounting hardware. Since your new lamps use 2 wires, you'll connect the red wire to the trailer running lamp circuit and install a ring terminal on the end of the black…

The 4 pole wiring harnesses we offer for trailers are pretty consistent when it comes to the wire gauge. The right turn/brake, left turn/brake and running lamp circuit wires are typically 18 gauge and the ground wire is typically 16 gauge. This is…