CE Smith Roller Style Boat Trailer Guide Ons Review Video

Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with the hub. We currently do…

Unless you wanted to weld the uprights to your trailer frame above the step you would need to drill some hole in the step so that you can install the CE Smith Roller-Style Guide-Ons #CE27610 that you ordered.

I have a few options to help with loading the boat on the trailer but the best would have to be the CE Smith Keel Roller for Boat Trailers part #CE29505. In order to mount them you'd need the Roller Shaft with Pal Nuts part #CE10727A and CE Smith…

You are correct that the roller style guide-ons #CE27610 are not meant to support weight. But the boat brushing up against them is to be expected and they will work fine for that. A little bit of space like you said will help to make sure the boat…

It's perfectly okay if the entire roller of the CE Smith Roller-Style Guide-Ons #CE27610 does not touch the side of the boat. 1/2 inch of clearance on either side between the boat hull and the rollers would be a great amount of clearance.

The CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610 measure 17-1/2 inches horizontally. It mounts on 3 inch frames and roughly 3 inches of it is a portion which cannot be adjusted to so you will have approximately 11-1/2 inches that you…

The CE Smith Keel Roller for Boat Trailers - Self Centering #CE29505 is a replacement roller for a keel roller assembly. This self-centering roller fits a 12" wide bracket with a 5/8" shaft. In order to use this on your boat trailer you…

The best guide-ons for a boat trailer are the post-style because they offer you the easiest way to guide your boat on the trailer, and the best of those is the 60 inch tall CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers #CE27760.…

Yes, the CE Smith Roller-Style Guide-Ons part #CE27610 will fit your EZ Loader boat trailer. The brackets work with trailer frames up to 3" wide x 4-1/4" tall so your 1-1/2" wide x 4" tall frame will not be an issue. I have…

Thanks for the picture! While we do not have an exact replacement for a Profile 2000 winch we do recommend the Dutton-Lainson Hand Winch item #DL14627 as a replacement. This winch has an 1,800 lbs capacity and will work great with the 20' x…

Yes, the CE Smith Trailer Hub part #CE13511 will fit as a replacement for your DICO hub 45264 but you will need to use a different seal as we have found that your spindle diameter is slightly different which means you need the #168255TB as well.

The only repair kit we have for your Profile 2000 hand winch is the Winch Ratchet Repair Kit by Dutton-Lainson item #DL70475. If this isn't what you are needing you will have to replace your winch. I recommend the Dutton-Lainson Hand Winch -…