CE Smith Pontoon Boat Trailer Post-Style Guide-Ons Review Video

Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will includes…

We've had customers use the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers #CE27670 on tri toon boats like yours that have the extra fins like yours have and they worked great. I attached a picture of this for you to check out as well. I…

The 4-way on your trailer is what's known as a wishbone connector like part #A35W42B. Two of the wires are the running light circuit which is a little easier to install since you can run one down each side of the trailer. This way you don't…

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

I reviewed quite a few photos of various Charmac cargo trailers and while I found some with external fenders I did not find any shown with lights installed. However, we do offer a lot of combination red/amber trailer lights and all are shown on the…

You will want to install the CE Smith Post-Style Guide-Ons #CE27670 on the inside of the pontoons (see attached image). This will be just as effective when trying to load up the boat so putting posts on the outside, which will also add to the…

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers part #CE27672 can be installed at the rear of the trailer or towards the center. That said, the further back they are installed the better they will do to help guide the boat on. I have…

Typically people install two of the CE Smith Post-Style Guide-Ons #CE27670 on their pontoon boat trailer but it is really up to you. You can install as many or as few as you would like. Two sets would give you a really good idea where you need to be…

I wish we had a specific set of rollers for your pontoon scissor trailer but since there are so many different designs with boat trailers and everyone has a different idea of how to utilize the rollers it really boils down to what you are wanting for…

One pair of guide-ons like the CE Smith #CE27672 should be sufficient as the V-shaped bunks should guide the pontoons in the rest of the way onto the trailer and keep everything properly aligned. If you click the provided link, you can see a video of…

The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…

The modern tire size for the 20.5x8.0-10 that you referenced is 205/65-10 which for a wheel and tire setup with that size and with a 5 on 4-1/2 inch lug bolt pattern we have the Kenda Wheel and Tire part #AM3H490 which would work well. Each wheel and…