Review of ABS Fasteners Trailer Leaf Spring Suspension - Equalizers - A2252CB-GALV Video

Nope, heavy-duty shackle straps are either 2-1/4" or 3-1/8", so the closest heavy-duty shackle strap to 2-3/4" would be the the 3-1/8" long, 1/2" thick Dexter Heavy-Duty Shackle Link #DX55FR. This option will still work for…

Equalizers like the ABS Fasteners #A2252CB-GALV actually will not carry a max capacity, but I can definitely say they will work with your weight rating. As long as your current equalizer measures 7-3/4 inches from center to center of the holes…

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…

Based on the current condition of your Dexter EZ Flex kit it's going to be the best solution to replace the entire kit with the part #K71-653-00. This comes with the two new equalizers you need, all new shackle straps, new bolts, nuts, and…

Doing an over-under kit like the part #K71-385-00 that you referenced will raise your camper the diameter of your axles plus the thickness of your leaf springs. So if you go out and measure those two things on your trailer you will know how much of a…

According to my research, the Big Tex 35SA Trailer comes with a Dexter 3,500 Lb EZ-Lube Axle. Therefore, in order to lift your trailer you can use the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 which will raise the trailer…

I can help you get basically the same thing as the #7359765-EB but with the bolt pattern you need but we don't have it as a complete kit. You'd need the bare axle part #7359765, the hubs #84556UC3, and then the brake assembly set #23-26-27…

Thanks for all that info and we can get you exactly what you are needing. Since you have a 2-3/8" axle that would be a 3,500 lb axle, so you want leaf springs rated for that weight. The concern with springs that exceed the rating of your axle is…

Based on the dimensions you listed the equalizer you need is the part #TREQE1. This equalizer has 7-3/4 inches between the mounting holes from left to right and 2-7/8 inches vertically.

The right and left orientation is determined if you are standing behind the trailer looking towards the tow vehicle. The left side is the drivers side and the right side is the passengers side. Tthe shorter brake pad will always be in the front of…

Since suspension components use lock nuts on the ends of the shackle bolts and the bolts need to be able to allow movement you actually don't want to torque down the bolts at all. You want to snug them up so that there's no lateral play but…

When you say EQ-E1 I believe you are referring to the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole part #TREQE1 which is manufactured in China. We have trailer leaf suspension products from…