Customers compare MR79ZR to these similar products
Products Featured in this Video
Hello everybody. This is Jeff at etrailer.com Today I'm gonna take a look at this MORryde shackle upgrade kit for tandem axle trailers with the MORryde LRE leaf spring suspension. Now this heavy-duty shackle kit is an excellent upgrade for your RV suspension. The half-inch thick shackle brackets are a lot thicker and stronger and more durable than the standard quarter-inch thick factory brackets.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
It sounds like you are definitely on the right track here. The #MR79ZR is indeed the correct suspension upgrade kit for your 2007 Colorado 5th wheel with LRE suspension. Moryde makes a fantastic suspension upgrade kit. The heavy duty shackles and wet…
view full answer...Hey Ken, thanks for reaching out! The MORryde ALLTREK 4000 Shock Absorbing Equalizers, 33" Wheelbase #MR89DR or 35" Wheelbase #MR29DR, are a good upgrade to a standard leaf spring suspension and will help to provide a better ride quality…
view full answer...When replacing shackle straps they should be the same length as the ones that were previously on your tandem axle trailer; replacing them with longer straps will result in additional play in your trailer suspension which could lead to additional wear…
view full answer...The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…
view full answer...The #MR78ZR kit is designed for the older RE suspension and won't work with your setup. You have the LRE4000 if you have the #20 shear springs. You will still need to replace the rubber shear spring with the #MR79UR. Then you can use upgrade kit…
view full answer...I would be happy to help you find the correct equalizer upgrade for your 2017 Keystone Bullet Premier Ultra Lite 22RBPR Travel Trailer with a 43" wheelbase, but since we do not have a kit that is specifically designed for that wheelbase you will…
view full answer...Yes, the Equa-Flex Cushioned Equalizers part #LC314336 will work with the MORryde Wet Bolt Kit LRE12-001. I took a look at the MORryde Wet Bolt Kit and was able to confirm that it uses 9/16" x 3-1/2" bolts which is what you need for the…
view full answer...Yes, there is an upgrade for the Dexter Curved Equalizer part #K13-142-02 that you have on your trailer now and that is the Equa-Flex Cushioned Equalizers part #LC314336 which have a rubber core that minimizes back-and-forth movement in addition to…
view full answer...I reached out to the manufacturer and the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3-5/16" Long #126B2 is a pressed in zerk fitting, so it cannot be replaced. This is also true for Dexter bolts as well. There are…
view full answer...Since your Lippert axle is rated for 4,400 pounds normally you would use Equa-Flex system #LC279687 which was designed for 3K to 6K rated axles like yours. But if your existing equalizers are close to 14-5/8 inches long from eye center to eye center…
view full answer...Typically a suspension bolt will be measured by the shaft of the bolt not including the head, since the head of the bolt isn't used in mounting the springs. The shackles are 3-3/4" long x 1-1/2" tall overall and the bolt holes are…
view full answer...The height of the Equa-Flex Cushioned Equalizers part #LC314336 is 3-1/4" which you can see in the photo below. If you only have 2" of height with the existing equalizers then this may raise the trailer slightly but not a direct 1:1 ratio…
view full answer...