Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching…
view full answer...We have one option that will work for you. The Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 #8-407-5UC3-EZ uses inner bearing #L68149 and outer bearing #LM67048 so it would work perfectly on your…
view full answer...A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that…
view full answer...Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…
view full answer...I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…
view full answer...To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…
view full answer...We do have an option for you, though the exact part you are looking for has been discontinued so you'll need to replace it with a different brand. What you can very likely use instead is a universal option from Camco, which will give you both the…
view full answer...What you have on your horse trailer is a pretty common clearance light that we do offer in red and amber as an LED. For the red you'd want the part #AL91RB and for amber part #AL91AB. You'll also need the grommet part #A91GB and the right…
view full answer...Thank you for the picture of your current Ventline bug screen. With seeing that the correct replacement would be the part #BVC0573-31.
view full answer...I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…
view full answer...You would want to measure the distance of the opening of the vent. The Vent Cover #BV0554-03 that you referenced fits 14-1/4 by 14-1/4 inch openings. Nearly all roof vents are 14-1/4 inch by 14-1/4 inch. You probably have one of the styles that we…
view full answer...Yes, it is possible for yellowing of plastic to occur in high heat. Florida tends to do a great job of that in the summer. Since it doesn't look like anything is cracked I would say go ahead and throw some Krylon Fusion on there. When they start…
view full answer...Filter Your Search
Contact and Help