Search: Universal Hitch   >   Heavy Duty Receiver Hitch   >  

The key number you referenced having is associated with an older Diversitech ball mount. I do have an option available for you to consider, however we do not currently carry the replacement key for the R3223 model as it's not available. If…

Instead of using the Hydraulic Brake Kit #AKFBBRK-35-D which requires using 14"-16" wheels you should use the Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly Right #T4423400 and Left #T4423500. These will fit with…

To determine the correct wheel studs you need you're going to have to measure the ones that you currently have. First of all are they drive-in, like #K916WB25 or screw-in studs, like #25-11? You'll then need to measure the length and…

The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…

I reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect…

Yes, the CE Smith Trailer Hub part #CE13511 will fit as a replacement for your DICO hub 45264 but you will need to use a different seal as we have found that your spindle diameter is slightly different which means you need the #168255TB as well.

The Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 uses frame brackets for installation, and those need to be positioned on the inside of an I-beam frame, as per the instructions (a copy of which I have linked for you). That is what…

The Curt hitch you are looking at part #E-100 will fit the 4 inch square bumper of your 5th wheel and has a tongue weight capacity 350 lbs tongue weight so it would easily carry 150 lbs of tongue weight. Curt requires the use of their stabilizer…

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit…

I checked with Curt and the distance between the vertical mounting flanges of the Curt #C15300 is 33.312 inches.

The B&W Tow & Stow Adjustable Ball Mounts will either fit a 2 inch receiver, #BWTS20048B, or a 2-1/2 inch receiver opening, like #BWTS20049B. None will fit both a 2 inch and a 2-1/2 inch receiver hitch opening. Normally. Class IV trailer…

Thanks so much for the photos, and there isn't a replacement for just the front coupler portion of the long-discontinued coupler you have. So in order to switch out from a 2" to a 2-5/16" coupler attachment, you will need to replace the…