1/2 X 13 Threads Per Inch Vintage Trailer Wheel Bolts
Question:
Looking for 1/2-13 wheel bolts can you help? 1/2" diameter, 13 threads per inch, 60 degree taper, 1-3/4" overall length, quanity 5 with left-handed thread, and quanity 5 with right-handed thread, as pictured.
asked by: Mike H
Expert Reply:
I reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect you would have to look for a rare bolt seller who would have this vintage style bolt. Brand new old stock would be the way to go as I would not trust used wheel bolts.
If all else fails, another option is to replace with a modern axle and hub that uses standard bolts. If you get to that point email me back and we can start working on the specs.
I have added a sample axel with hub with brake hubs and without.
Products Referenced in This Question
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 1 Inch Long
- Redline
more information >
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs
- Shop: Dexter Equalizer for 3" Wide Slipper Springs - 18-3/8" Long - 1-1/8" Center Hole
- Shop: Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles - 30" Long
- Search Results: hba~10
- Shop: Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 7-1/4" Shank - 14 Hole - 20,000 lbs
- Shop: Provider 215/75R17.5 Radial Tire w/ 17-1/2" White Dual Wheel - Offset - 10 on 8-3/4 - LR H
- Shop: Trailer Hitch
- Shop: Brake Controller
- Search Results: dm5425
- Search Results: 50~87~007
- Shop: Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 94" Long - 7,000 lbs
- Search Results: 12k jack
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000-lb Axle
- Search Results: eletric jack
- Shop: Trailer Wiring
- Search Results: 2 inch winch strap
- Q&A: Replacement Bearings and Seal for Dexter Hub 8-147
- Shop: Gooseneck Hitch
- Search Results: ts20040b
- Q&A: Replacement Key for Trailer Lock with Key Number R3223
- Shop: Windshield Wiper Blades
- Video: Scrubblade Windshield Wiper Blades Review
- Video: Scrubblade Platinum Windshield Wiper Blade Manufacturer Demo
- Q&A: Replacement Hub for DICO 45264
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Video: Review of Maxxair RV Vents and Fans - Roof Vent - MA00-04751KSX
- Shop: Vehicle Engine Heaters
- Video: Review of Maxxair - RV Vents and Fans,Enclosed Trailer Parts - MA00A03550K
- Q&A: Wiring for Dexter Electric Over Hydraulic Brake Actuator # K71-651