What Is The Recommended Bunk Board Length For 16' Long Boat?

Question

Question:

Ive got a 16 ft boat how long should the bunk be

asked by: Jim E

0

Expert Reply:

Ideally you want bunk boards that are at least 50% of the length of your boat, and want the to run from the stern and as far forward as you like.

Since your boat is 16' Long you will want at least 8' of bunk boards, but I recommend going with two of the 5' Bunk Boards # CE27820 on each side of the trailer.

You will need two sets of the mounting brackets # CE10000G-4, and will also need U-bolts to attach the brackets to your trailer. If you can tell me the size of your frame I would be happy to recommend the correct U-bolts for you.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

There isn't an exact length of bunk boards that are required for pontoon boat bunks but in general around 75 percent of the length of the boat should be the length of the pontoons and you'll be good. So for a pontoon boat that…

view full answer...

Answer 2

Trailer hitch balls aren't designed to have spacers between them and the ball mount (which is why different ball mount rise/drops exist) so I don't recommend doing that. What I recommend doing instead is picking up either a different…

view full answer...

Answer 3

The longest boards that we offer are going to be the CE Smith Carpeted Bunk Boards, #CE27840, which measure 6 ft long. I have included a link to all of our carpeted bunk boards for you. The bunk boards can be mounted to existing brackets on the…

view full answer...

Answer 4

To make your own bunk boards, pressure treated pine has long proven to be the best kind of treated wood to use because it holds up well and it is strong enough to support a boat. To wrap around the 14 ft long 2 x 4 bunk boards (actually 1.5 x 3.5),…

view full answer...

Answer 5

Two 12 foot long bunks boards will work well to support your 21 foot boat. Ideally, the bunk boards should be at least half as long as your boat and run from the stern (or a few inches beyond it) to the bow as far forward as you like. Due to shipping…

view full answer...

Answer 6

Thanks for the photo. It does indeed look like you need to move your keel rollers up towards the bottom of the boat until they are touching but not supporting the full weight. Therefore, marking the bracket when the rollers are flush to the bottom…

view full answer...

Answer 7

Trailer leaf springs can grow longer after many years of use. A new springs that measures 25-1/4-inches long like #e57SR could easily measure 25-1/2-inches after years in service on a trailer. Springs can lengthen as much as 3/4 of an inch. If your…

view full answer...

Answer 8

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

Oddly enough I can't find a decent u-bolt that we carry that would work well for your application.

view full answer...

Answer 11

Yes, if you install the #MAL33TR on your Malone Microsport you'd still have the same amount of bar space to carry the same amount of kayaks as you did before. This keeps the bars still above the fenders of the trailer so you don't lose any…

view full answer...

Answer 12

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...