Replacement Bunks Needed for 18 Ft Klamath Aluminum Boat on Hanson Trailer
Question:
Hi, I have a little bit of a mismatch, but the trailer was free. Currently there is a 4 bunk configuration for the 19foot sea swirl that was on the Trailer prior to my ownership. Im putting a 18foot Klamath aluminum boat. The rear bunks are 5foot and sitting toward the outside or nearer the gunwales than the front bunks which are 56. All bunks are 2X6. I want to replace them with just 2 - 2X4 bunks. Do you make longer than 5? I guess I could run 45. Let me know your thoughts.
asked by: Mike
Expert Reply:
The longest boards that we offer are going to be the CE Smith Carpeted Bunk Boards, # CE27840, which measure 6 ft long. I have included a link to all of our carpeted bunk boards for you. The bunk boards can be mounted to existing brackets on the trailer or you can use the CE Smith Bolster and Swivel Bracket Assemblies, # CE10000G-4, which would attach to the trailer frame and allow for height and angle adjustment.
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 72 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 60 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 1810 - Chrome Plated (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
- Shop: CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs
- Q&A: Recommended 5' Bunk Boards and Mounting Hardware For Boat Trailer
- Video: Review of CE Smith Boat Trailer Parts - Galvanized Steel Bolster Bracket - CE10101G
- Shop: Stainless Steel Hex Lag Screw - 3/8"
- Shop: Crossbars for Malone MicroSport Trailers - 78" Long - Galvanized - Heavy Duty
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Q&A: Is there a 12 Inch Trailer Tire that is Rated for 80 Miles Per Hour
- Video: Malone Trailer Tongue Kickstand Review
- Search Results: winch bracket
- Search Results: magic tilt trailer
- Search Results: trailex
- Q&A: Proper Trailer Bunk Board Length for 21 Foot Boat
- Q&A: How to Upgrade Trailer with 45 MPH Speed Rating for Highway Speeds
- Q&A: Converting Boat Trailer From Rollers to Bunk Boards
- Search Results: winch stand
- Q&A: How To Convert a Boat Trailer from Center Rollers to Bunk Rollers
- Q&A: What is the Difference Between a Bolster Bracket and a Bunk Bracket
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Search Results: 44649
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Trailer Tire Sizing