Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces shock absorber for Dexter Model 60 brake actuators.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this replacement shock absorber for the Titan Model 60 brake actuators. This is going to replace the shock absorber for the Titan Model 60 brake actuators. And this is also going to fit the Dico Model 60 brake actuators as well. Now, just to give you some overall dimensions, gonna pull out my ruler here.
Looking at the collapsed length, I'm not gonna be able to show you the extended length. But looking at the collapse length, lining up my ruler center to center here, we are sitting right at almost five inches as you can see there, center to center. So, that's gonna be the collapsed length. And on the extended length, this is gonna be sitting right at about 6 1/4 inches. So, if you are needing a replacement shock absorber for your Titan or Dico Model 60 brake actuator, this is going to be an exact replacement from Titan, so you can trust that it's going to work with your Model 60 brake actuators.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.7 out of 5 stars (96 Customer Reviews)
Replaces shock absorber for Dexter Model 60 brake actuators.Fit well on my 20 yr old trailex alum car trailer. This part along with a new master cylinder solved the shuttering when applying brakes. The hydraulic channels in the master cyl are tiny and corrosion can block the channels.
Just finished putting brakes, rims and new tires on my boat trailer. Etrailer had everything I needed to get the Job done. I received my tires and wheels only to discover I was sent 3-14" tires and 1-15". I quickly called and talked with Courtney and she was very apologetic and made sure the right tire and rim were sent out the same day. I received it 5 days later and was able to complete the job. I will definitely use etrailer again in the future, it was a pleasure dealing with them. Here is a picture of my project.
Fits and works perfectly. Rebuilt entire coupler and trailer springs
Found this shock online here at etrailer which I had trouble finding anywhere else with any confidence. The listing on etrailer.com helped me identify the exact shock I needed for my 25 year old Surge unit. Fit right, works great! Thanks etrailer! Gary
I had to enlarge one bore from 7/16 diameter to 1/2 to fit my surge brake model, Titan Aero 7500, but I knew that when I bought it and it wasn't difficult to drill out. Other than that, I think this will work for my surge brake setup.
Exactly what I needed
Working well. No more banging master cylinder when I stop.
Ordered this shock absorber for the surge breaks on my car dolley. When I was towing my car on the dolley, the surge breaks would 'chuck' (swiftly engaging and disengaging causing the dolley and car to quickly stop / start as the breaks went on and off) The shock fit exactly and seems to have fixed the problem. That takes a lot of the worry about towing a car off my shoulders, and that is a good thing!!
I ordered the part on a Tuesday and it arrived here in Florida, after crossing half the country, on Friday morning. Great job!
It did the job.
Item appeared to have been installed / used though listed as new. The part’s appearance does not matter but getting long service life does
Parts match perfectly. Parts came 2 days early.
Etrailer transaction was easy and delivery of the shock and master cylinder was fast. Both products installed without any mods and my boat trailer is a dream to tow now.
There was a loud clunk and you could feel it when using the surge brakes on our ski boat trailer. The master cylinder was badly pitted. Now the braking is smooth and responsive.
part is correct and is now installed on trailer hitch
Dave E.
8/24/2017
still working fine good quality
thanks it finally made it safe
easy install on hydraulic brake actuator for 6000 lb boat/trailer. trailer was slamming when stopping/starting
I was pleased with the brake lines and trailer shock absorber. I received what was shown. They came in a timely manner, was what I needed and was reasonably priced. Thank you. I am installing them today. Will be back to order more parts in the future.
Pat B.
This was exactly what I needed to fix the tongue on my trailer. It was sliding in and out about three inches, causing a bang when a started and stopped. The trailer is for a 2000 Bayliner boat. This shock absorber matched the old one perfectly. And, it only took about ten minutes to replace.
Perfect part and delivered very quickly.
Product came well packaged, and was identical to the shock being replaced easy install, no more clanking when starting and stopping ( also replaced master cylinder)
Easy install
Replaced the shock in my Titan 60 actuator assembly along with the actuator itself. Less expensive and easier than replacing the whole Titan 60. This part took all or 5 min.
This part fit perfectly on my 2009 boat trailer replacing the broken part and solving a problem.
Brakes were rebuilt with etrailer parts and are working great. Thanks // etrailer.
Replacement shock absorber fit perfectly. Fast shipment and item well packed.
The product arrived as scheduled and fit exactly as advertised. At first, I was concerned that there was a mix-up on shipping details, but Stacy looked into the matter and assured me that everything was good to go. Excellent service and follow up!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
George
3/16/2018
It has been a year since I wrote this review. A year and 5000 miles. The shock absorber continues to do its job as designed. Anyone with this chucking problem should take a look at this cure. Easy to do and worth the effort