48" Long 4-Pole Loop with Cover
(86 reviews)
Price: $9.46
In Stock
48" Long 4-Pole Loop with Cover
Item # HM47115
Retail:$15.54
Our Price: $9.46
You Save: 39%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (86)
- Q & A (0)
- Videos (2)
- Photos
Hopkins Trailer Wiring - HM47115
- Wiring Adapters
- Single-Function Adapter
- 4 Flat
- Plug and Lead
- 0 - 5 Feet Long
- 4 Flat
- Hopkins
4-Way Flat Wiring Harness Extension
- Extends your current 4-way connector 48"
- Includes cover and grease
47115 48" Long 4-Pole Loop with Cover
California residents: click here
Video of 48" Long 4-Pole Loop with Cover
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Trailer Wiring Harness Installation - 2008 Chevrolet Express Van
Today on our 2008 Chevy Express Van, were gonna install the Hopkins 4-Pole wiring kit with part number 31345. First, were gonna need to access the rear cargo area of the vehicle. Behind each taillight is the manufacturers connection. Well be plugging inline with this connector. To make our connection, well need to split the two manufacturers connection. Pressing on the locking tab, well pull them apart.
Now we can take our new Hopkins connector and plug inline with the manufacturers. Next, we can take our white wire with the ring terminal already pre-attached; this is our ground wire. Here to the body of the vehicle is a manufacturer ground. So what well do is go ahead and remove this bolt and make our ground connection here. Alright, now weve got our ground bolt removed, you can see that it wont fit to the ring terminal.
So what Im gonna do is go ahead and cut it off and replace it with the one thats slightly larger so itll fit to the manufacturer ground. Well go ahead and reinstall our ground stud with our new ground. Now were gonna go ahead and route the converter box 4-pole wire and our red power wire in the hide in paneling and bring it out the lower access. Now with those wires in place, were gonna go ahead and set them aside for now and route the passenger side connector and green wire over behind the taillight on the passenger side. To do this, well just gonna follow the manufacturer wiring up and around the door frame.
As I go along, Ill just use some black zip ties to secure the wiring. Now weve made both connection points behind the taillight and we secured the wiring, lets go ahead and go back, cut up any excess from the zip ties with a pair of side cutters. This will just clean up our install a little bit. Alright, now that weve got our signal wire run and secured, we need to go back and add to our power wire. Our red wire with the yellow butt connector comes directly out of our converter box and well add it to the additional red wire supplied with our install kit.
For a little added security, Im gonna go ahead and wrap the connection point with some black electrical tape also. This will help to keep out any dirt, moisture and debris. Now, both wires, which is our 4-pole connection point and our red power wire need to be routed outside of the vehicle. Were gonna run straight down to the inside of the body panel using a couple of metal clamps to secure our wire and routing it along the floor, underneath the weather stripping and outside the vehicle that way. For an added security measure, you may add a zip tie here to secure their wiring and our converter box. Now to route our wires, well just come along the floor of the van and out the corner. What Im gonna do is take a pair of tin snips and cut a little of the body away so that we can make that corner and reinstall the wire stripping. Then we can feed our wires underneath the vehicle where our 4-pole will be routed over to the hitch and our red power wire is gonna get routed up along the frame to the battery. Were gonna be extra careful to stay away from moving components such as a steering or suspension or excessive heat such as the exhaust. Were just behind the front axle of our vehicle and weve run out of length from our power wire. The reason for this is because were working with an extended version so the length of the power supplied in our install kit isnt quite long enough. But now what were gonna do is strip down the wire and well add a butt connector and some additional length to our power wire. Just as I did before, well go ahead and tape up the connection point. Now we can go ahead and continue routing our wire. Alright, now weve got our power wire straight up into the engine compartment. Were right here at the battery so Im gonna install to the manufacturers wiring over to the positive battery terminal. Now, before I completely secure my wiring, we need to add a fuse holder. To do this, Im gonna cut off any excess length from my power wire, strip it back and add it to the butt connector on the fuse holder. Just as we did earlier to our butt connectors, were gonna go ahead and use some black electrical tape and tape this one also. Now, before I make my connection to the battery, Im gonna go ahead and remove the fuse and then reinstall it after we make our connection. Now we can go ahead and make our reconnection with our power wire ring terminal to the battery. However, with the side post mounted battery style, youll need to add a battery extender to do so part number DW05416. To add our extender, first well need to remove the old battery post. Now, to remove the positive battery terminal from the positive battery cable, well need to go ahead and push it out from being held in with the rubber coating around it. Now that we have the old one out, we can go ahead and install the new one then well reconnect the positive battery cable. Now well go ahead and remove our hold down nut and install our ring terminal and well secure that with the hold down nut and tighten it down. Now were ready to go ahead and reinstall the fuse in the fuse holder. As you can see, our 4-pole connector isnt gonna be long enough to attach to center of the hitch. So what well do is to add a 4-pole loop made by Hopkins part HM47115. As part of the install kit for our 4-pole loop comes dielectric grease. Well go ahead and take some dielectric grease and place it directly into the connector. Once theyre firmly together, Im gonna go ahead and take some black electrical tape and tape up the connection just to assist in keeping out any dirt and debris. Now weve got our connection made, well go ahead and route it to the center of the hitch. Now well go ahead and take some black zip ties to secure our wiring then we can take the end cap provided with our new 4-pole loop and install it at the end of our new 4-pole connector and secure it to the hitch. Thatll complete the install of our new 4-pole wiring by Hopkins part number 31345.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
48" Long 4-Pole Loop with Cover - HM47115
Average Customer Rating: 4.9 out of 5 stars (86 Customer Reviews)
by: Carl 11/07/2023
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers.
On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
by: John M06/15/2017
I have now installed the following on my 2017 Wrangler:
Brake light relay kit .
Hopkins Towed vehicle Tail Light wiring kit.
Blue Ox base plate.
Blue Ox Patriot Portable RF Braking System.
All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project.
I would recommend you all with no hesitation.
by: Logan11/17/2017
I love the new setup for my truck. I changed the receiver to a Draw-Tite Ultra Frame model and mounted the connection on the receiver. It works great and accommodates both of my trailers with the 7 pin and 4 pin connections. Couldn't be more pleased. My rewiring of my light trailer is flawless, solid connections and good quality. Thanks!
by: S. Mono08/14/2017
Great service and selection, shipped fast and arrived ok. Parts work very well, and so far so good. Still working on a more secure and adjustable mounting solution so the light can be seen when the rack is up or down.
by: James 02/07/2024
Works great
by: Cliff 03/09/2024
Very fast service and shipping!
by: Fowler09/21/2022
What's not to like. I've made a bunch of pigtails in the past and this is nice and neat without splices and tape. I use it to connect the custom Hopkins taillight kit on my car to my motor home.
by: Chris B12/19/2016
Works great as an added extension for when the other cable is shorter than you like it to be.
Chris B.
12/19/2017
I have used this numerous times and works well.
by: Bob M12/05/2016
Product was exactly what I was looking for. No one local carried it. Quality was excellent as was the service.
Great job from a great company.
Merry Christmas to all at etrailer.
Bob M.
12/5/2017
Still working great!
by: Mustang Man04/28/2017
Lights have worked exceptionally. I didn't experience the wiring difficulties expressed by others, and I have the larger cargo carrier. My only complaints are that the wiring plug to the light fixture is exposed to the cargo and can be damaged, and the fixture itself can be pushed out by cargo. I made a protective cover mount to correct these problems. I would note that the above complaints can be applied to all the light fixtures I reviewed across the internet.
by: Nicholas06/10/2023
Excellent fit. Makes good connection.
by: Ed09/16/2016
*Although I have not installed the trailer jack yet it looks like a direct replacement for the original one on my boat trailer. The wheel that goes with the jack definitely looks like a better fit than original.
*The electrical 4 conductor plug set... I'm using for a quick disconnect for a third
( center ) brake light for tailgaters
by: Young Dave06/17/2018
Works perfectly, just as described.
I used mine when I was installing of the ModuLite Circuit Protected Vehicle Wiring Harness Item # 119190, so I didn't have to back up to the camper when checking function before I finished the install. Now it will be extra parts if I need it.
by: Michael08/29/2020
Using this for a hitch extension. The 4 wires are fused flat. Had to use 1/2 loom instead of 3/8. I understood the 3/8 would work when I ordered. Had the description shown the wires were fused flat i would give 5 stars.
by: Gary B.06/14/2019
Along with 7-pin to 4-pin adapter this added the length I needed for my cargo tray I had purchased from etrailer years ago.
by: Charles12/12/2018
I bought this item because I have one trailer and three different vehicles set up for hauling it. Each of the vehicles have different length pigtails, which pose a problem. This was an inexpensive solution! Much easier than extending the wires on two vehicles or the trailer. It's well-made, good price and shipped quickly. Thanks
by: Gordon B.07/16/2015
The 12" Ball Extension Bar works Great! It allows me to make 90 Degree Angle Turns without hitting my trucks bumper. Of course I need to extend the electrical light connection (HM47115), just had to trim the soft plastic to fit perfectly into my trucks connection.
by: Ross 09/08/2022
Works perfectly. Teamed it up with a plug mount and no more dangling cable and plug, it's up on the bumper in easy reach.
by: Mike04/25/2017
Excellent quality. Good product. Using it to extend from my boat trailer wiring connection to my truck. Needed because I have a camper on the truck and also needed to have extended slide-in hitch extension.
by: Craig04/21/2018
Excellent quality. They thoughtfully included dielectric grease and a protective cap to help prevent corrosion so you don't have bad connections and dead lights.
by: Chucky F08/17/2015
The cargo tray is exactly as I expected. It meets and exceeds expectation. The LED light kit however is a big disappointment. The connector significantly protrudes into the cargo tray. Because of its design it is very susceptible to any load pushing it out of its socket onto the road. It would have been perfect if it had a pigtail connector instead. And the wire harness is to short! In the future suggest an extension. Oh well. When the inevitable happens I will make my own.
by: Forrest B11/09/2015
Item arrived and was as described. I felt what was really worth mentioning was the customer service. I had problems ordering on my smart phone due to coverage, so I had to call. I spoke with two customer service representatives and they were both fantastic. It's refreshing to see there is still a company that obviously cares about service.
by: Felix03/01/2010
Excellent idea.Makes wiring from plug to lights much easier and more reliable. If plug gets damaged, now I only need to replace harness back to the junction box. I plan to install another box in the rear of the trailer to eliminate Scoth lock connecters that are susceptible to corrosion. Only suggestion, could have made the box smaller to fit inside the trailer channel. No need for it to be this big.
by: Don M06/14/2017
The products received were as expected. All fit as they were supposed to. Thank you to Rebecca for steering me in the right direction with the extension wiring.
by: Tom J.12/06/2013
The product was exactly what I expected, and it arrived in a timely fashion. I consider etrailer my go-to vender for anything to do with towing, because tricky installations (not the case in this purchase) are explained in videos, etc.
25
86
Show More Reviews
See what our Experts say about this Hopkins Trailer Wiring
- Adding Wiring for Braking System With a 2006 Jeep Wrangler.In order to get 12V for your battery charger, you will only need to splice wires. You would want to us the 4-Pole Loop with Cover # HM47115, cut off one connector and splice it into the RoadMaster 6-Wire Trailer Connector # RM-910030-7. For an adapter you would then want to use the Hopkins Endurance Flex-Coil Trailer Connector Adapter - 7-Way to 6-Pole # HM47053. I've added a couple links to video reviews of these products for you to take a look at.
view full answer... - How To Use 7 Way RV Connector To Power Lights And Charge Battery On Towed VehicleI highly recommend installing Hopkins Endurance Multi-Tow Adapter # HM48470. This replaces your RV's 7 way and gives you a 7 way AND 4 way flat connection. Then you can hook upMagnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR directly to the 4 way flat provided on the adapter. These tow lights have a 20 foot long wiring harness; use 48" Long 4-Pole # HM47115 if you need 4 more feet of wiring. For the charge line going to the towed vehicle's battery, you...
view full answer...
- Could Hopkins 4-Way Extension # HM47115 be Used When Flat Towing VehicleYes, if you were looking for a 4-way extension to go from your tow vehicle to your Jeep that is being flat towed with a tow bar and both connections are 4-way connectors the # HM47115 could be used as a way to make that connection. This provides 4 feet of extension which would normally be enough for this application.
view full answer... - Available 4-Pole and 7-Way Trailer Wiring ExtensionsWe do offer many types of trailer wiring extensions. For 4-pole flat trailer wiring you can use 4-foot extension # HM47115 or 1-foot part # 9653P. For 7-way trailer wiring we have 28-inch extension # TLW6028, 21-inch # TLW6021 or one of the others shown on the linked page.
view full answer... - Recommended 34 Inch Hitch Extender For Truck with In-Bed Camper and Towing TrailerThe Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long # RP45292 or the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long # C45048 will work for your truck and trailer as you described it, but I recommend the Reese because of its higher rating. The measurements are from hitch pin hole center to hitch pin hole center. We measure this way because the hitch receiver can have different dimensions from the hitch pin hole to the end...
view full answer... - Trailer Wiring Extension for a Tall 2018 Ram 2500 Power Wagon Towing a Rental TrailerWe do have various trailer wiring extensions you could use. If the rental trailer has a 7-Way blade style connector you could use an extension such as # C56080. Granted this one is 7 feet long but it costs less than shorter extensions and who knows when the additional length might come in handy. If the trailer takes a 4-Way you could use 12 inch extension # HM48145. Need more length? There is a 48 inch 4-Way extension too # HM47115.
view full answer... - How to Make 4-Way Male to 4-Way Female AdapterAn easy solution would be the part # HM47115. This is a 4-way male to 4-way female style connector which comes with 48 inches of wiring but you could easily cut that down to a shorter amount as needed.
view full answer... - Available Lengths of 4-Pole Trailer Wiring ExtensionsWe do offer 4-pole extensions that can be used with the 7-Way to 5-Way/4-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs # C35FR. We have 4-pole extensions in many lengths including the 10-foot # HM48235, 4-foot # HM47115 and # HM47114, and 2-foot # HM47004.
view full answer... - 4-Way Trailer Wiring Extension Recommendation for 2014 Toyota 4RunnerIf your 2014 Toyota 4Runner already has trailer wiring installed the circuits have already been converted to be combined to match what your trailer will require. The part # HM47115 is a 48 inch (4 foot) long 4-way extension harness. You aren't the first person with a 2014 Toyota 4Runner to be looking for an extension harness either, but this did work well for the previous customer.
view full answer... - Recommended Flat Towing Base Plate and Wiring for a 2013 or 2014 Honda CR-VFor a 2013 Honda CR-V we have the Blue Ox Base Plate Kit - Removable Arms # BX2258 that will work well with your Blue Ox Tow Bar. I recommend using Loctite Threadlocker # LT37420 for this installation. For your vehicle wiring, I recommend the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56304 which is the easiest kit to install with no splicing required and connects directly to the Honda wiring harness behind the tail lights. You will also need the 48" Long 4-Pole Loop...
view full answer... - Can an Lighted LED Hitch Cover be Converted to a Tailgate Emblem on a Dodge RamWhat you have described regarding your # CR-007D would work but instead of splicing in more wire you could just use a 4-Way extension such as # HM48145 which is 12 inches or # HM47115 which is 48 inches. The longer one would give you more options for routing the wiring. Keep in mind that the hitch cover was not designed for this purpose so any warranty it has will be void.
view full answer... - Flat Towing Setup For 2016 GMC Yukon DenaliAs long as the 2016 GMC Yukon Denali has 4WD with a two-speed transfer case that has a Neutral and 4 wheel drive low setting, you can flat tow it with all 4 wheels on the ground behind the 2018 Allegro Bus. If the GMC has 2WD, it has to be towed with a dolly with the rear wheels off the ground. When flat towing or dolly towing, the battery does need to be disconnected. You can use a Roadmaster quick battery disconnect part # RM-766. The Roadmaster battery disconnect allows you to wire in...
view full answer... - Can Spectro 4-Pole 12-Inch Car and Trailer End Loop # 9653P Be Used as a Wiring Harness ExtensionThe Spectro 4-Pole 12-Inch Car and Trailer End Loop # 9653P is a perfect solution for cases where trailer wiring is just a bit too short. We also offer a 4-foot # HM47115 from Hopkins.
view full answer... - Trailer Wiring Extensions for use with Reese Titan 2-1/2-Inch Hitch Box Extension RP45292Thank you for your recent purchase of the Titan 2-1/2-Inch Hitch Box Extension # RP45292 and the Blue Ox 2-1/2-Inch Hitch Receiver Immobilizer # BX88225. These two items are compatible with each other. For a trailer wiring extension if you need a 7-way type you can use TorkLift 21-inch # TLW6021, 36-inch # TLW6036, 42-inch # TLW6042, 48-inch # TLW6048, 60-inch # TLW6060 or for a 10-foot length part # TLW6510. If you need a 4-pole wiring extension we have 12-inch # HM48145, 48-inch #...
view full answer... - Wiring for 2018 Ford Edge Sport to be Flat Towed and to Tow a TrailerIt's actually easier than you might think. I recommend using the Tekonsha wiring harness, part # 118677, for towing the trailer with your 2018 Ford Edge Sport because it has a higher maximum amperage than the other options. It plugs in behind the tail lights and then you run a hot lead up to the Edge's battery to power the converter box. Then for the toad wiring use the Hopkins # HM56011 which also plugs in behind the tail lights. Both harnesses use the same connectors and can be plugged...
view full answer... - Recommended Tow Bar Wiring for 2016 Ford F-150You are correct that aluminum doesn't work well with magnets. The Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector # TL21RK can only be attached to the cab of your truck if you choose to use them or to a steel bumper. I recommend using the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56009 instead. This harness connects behind your tail lights to your factory harness and then you simply run the connector on the harness to the front...
view full answer... - Tow Bar Wiring Recommendations to Flat Tow a 2011 GMC Sierra Behind an RVYes, we do have tow bar wiring harnesses that will activate the lights on your 2011 GMC Sierra and plug into the connector on your RV. If the RV has a 4-Way flat connector you can use diode kit # RM-154. If the RV has a 7-Way trailer connector you can use diode kit # RM-15267. We also have Hopkins harness # HM56101 which plugs in line with the vehicle wiring as shown in the installation video I linked for you. If you go with this harness you will also need extension # HM47115. If the RV...
view full answer... - 7-Way Commercial Truck Plug to 4-Way WiringFor a Commercial Truck 7-pin, you will want the 7-Pole Round Pin to 4-Flat Adapter # 47405. Then if you need extra length you can use the 48" Long 4-Pole Loop with Cover # HM47115.
view full answer...
- Wiring Wishbone Trailer Wiring Harness The 5 wire Wishbone Harness with 4-pole connector splits the running light circuit into two wires. One wire would run along the drivers side of the trailer, the other along the passenger side. Typically, the running light circuit is only carried one one wire and at the rear of the trailer, you would need to split off a wire to feed the running light on the opposite side of the trailer. The wishbone harness makes the wiring job a bit neater and eliminates the need to splice in a feed for...
view full answer... - How to Run Hopkins 4-Pole Extension # HM47115 to Exterior of Vehicle and Hitch Mounting BracketUsually within the rear cargo area of a vehicle there will be access holes, sometimes filled with a rubber grommet, through which you can route wiring. Since the size of the 4-pole plug # HM47115 may be too large for some of these holes it may be necessary to widen the opening. Take a look under the rear cargo area carpet and trim panels for any such available openings. If you find that you need to enlarge (or create) a hole for the 4-pole be sure to check behind that area to ensure no...
view full answer... - Recommended Magnetic Light Kit for Vehice Carrying MotorcycleThe simplest way to add supplemental lighting to any towing/hauling set-up is a magnetic light kit. Magnetic lights are inexpensive, fast to install and remove and they require no permanent alterations to your carrier or wiring. You could place a set of lights like # TL21RK on the MH's roof where they will be highly visible. These and most similar lights use a 4-pole harness for connection. We offer a wiring extension if needed, # HM47115. We also offer wireless LED magnetic lights, part...
view full answer... - Recommended Flat Towing Setup for a 2013 Smart Fortwo Passion CoupeTo be able to flat tow your 2013 Smart Fortwo you will need a handful of equipment. The Roadmaster Base Plate Kit # 52285-1 will work really well on your Fortwo. It features removable arms so when you are not towing you will still have that nice, clean look. The next thing we will need to look at is a tow bar, like the Sterling # RM-576 from Roadmaster, and wiring, like the Roadmaster # RM-15267. This will help your brake lights still work on your Fortwo while towing. Another thing you...
view full answer... - Availability of Light Kit for Erickson EM07600 Big Bed Load ExtenderAlthough there isn't a purpose-built option for what you want to do, there are options from a magnetic mount light kit to options that would require some modification of the load extender. For the easiest option that wouldn't involve any alteration or fabrication, I'd recommend a magnetic mount lamp set up like the # RM-2120 offered by Roadmaster. If you'd rather avoid a magnetic option, something like the # RM-2120 could be a good choice. The lamps mounting flaps could sit atop the arms...
view full answer... - Parts Needed to Extend a 4-Way Trailer ConnectorYou just need an extension loop like # HM47115 which is 48 inches long. If that is too long then we have a 12 inch extension # 9653P. If you want to make these extensions permanent then I recommend using some dielectric grease between the connections, # 11755, using zip ties to hold the connections together, and then using electrical tape to wrap it all up to protect it from the elements.
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Video Edited:
Zack K
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John M.
6/15/2018
I am still in love with the products. My only issue is having enough time to use them more.